An update for kernel is now available for openEuler-22.03-LTS-SP4 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2026-2930 Final 1.0 1.0 2026-07-09 Initial 2026-07-09 2026-07-09 openEuler SA Tool V1.0 2026-07-09 kernel security update An update for kernel is now available for openEuler-22.03-LTS-SP4 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.(CVE-2026-43052) In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix](CVE-2026-43110) In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.(CVE-2026-43111) In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation.(CVE-2026-43206) In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache after doing PARTIAL_VALID1 zeroout When splitting an unwritten extent in the middle and converting it to initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent. Assume we have an unwritten file and buffered write in the middle of it without dioread_nolock enabled, it will allocate blocks as written extent. 0 A B N [UUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and leave the entire extent as unwritten. 0 A B N [UUUUUUUUUUUU] on-disk extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Z: zeroed data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and leave an written extent from A to N. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Finally ext4_map_create_blocks() only insert extent A to B to the extent status tree, and leave an stale unwritten extent in the status tree. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUWWWWWWWWUU] extent status tree [--DDDDDDDDZZ] Fix this issue by always cached extent status entry after zeroing out the second part.(CVE-2026-45892) In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache when splitting extent fails When the split extent fails, we might leave some extents still being processed and return an error directly, which will result in stale extent entries remaining in the extent status tree. So drop all of the remaining potentially stale extents if the splitting fails.(CVE-2026-45899) In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: hole Then, the outer calling functions will not correct this remaining hole extent either. Finally, if we perform a delayed buffer write on this latter part, it will re-insert the delayed extent and cause an error in space accounting. In adition, if the unwritten extent cache is not shrunk during the splitting, ext4_cache_extents() also conflicts with existing extents when caching extents. In the future, we will add checks when caching extents, which will trigger a warning. Therefore, Do not cache extents that are being split.(CVE-2026-45912) In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted.(CVE-2026-52923) In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().(CVE-2026-52943) In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI endpoint descriptor scans snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint descriptor size before using baAssocJackID[], but the descriptor walker can still return a class-specific endpoint descriptor whose bLength exceeds the remaining bytes in the endpoint-extra scan. That leaves later flexible-array reads bounded by bLength, but not by the remaining bytes in the endpoint-extra scan. Stop walking when bLength is zero or extends past the remaining endpoint-extra scan.(CVE-2026-52963) In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix missing expect put in obj eval nft_ct_expect_obj_eval() allocates an expectation and may call nf_ct_expect_related(), but never drops its local reference. Add nf_ct_expect_put(exp) before return to balance allocation.(CVE-2026-52970) In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu <(CVE-2026-52986) In the Linux kernel, the following vulnerability has been resolved: sched/psi: fix race between file release and pressure write A potential race condition exists between pressure write and cgroup file release regarding the priv member of struct kernfs_open_file, which triggers the uaf reported in [1]. Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards the memory deallocation of of->priv performed within cgroup_file_release(). However, the operations involving of->priv executed within pressure_write() are not entirely covered by the protection of cgroup_mutex. Consequently, if the code in pressure_write(), specifically the section handling the ctx variable executes after cgroup_file_release() has completed, a uaf vulnerability involving of->priv is triggered. Therefore, the issue can be resolved by extending the scope of the cgroup_mutex lock within pressure_write() to encompass all code paths involving of->priv, thereby properly synchronizing the race condition occurring between cgroup_file_release() and pressure_write(). And, if an live kn lock can be successfully acquired while executing the pressure write operation, it indicates that the cgroup deletion process has not yet reached its final stage; consequently, the priv pointer within open_file cannot be NULL. Therefore, the operation to retrieve the ctx value must be moved to a point *after* the live kn lock has been successfully acquired. In another situation, specifically after entering cgroup_kn_lock_live() but before acquiring cgroup_mutex, there exists a different class of race condition: CPU0: write memory.pressure CPU1: write cgroup.pressure=0 =========================== ============================= kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereference Consequently, there is a possibility that of->priv is NULL, the pressure write needs to check for this. Now that the scope of the cgroup_mutex has been expanded, the original explicit cgroup_get/put operations are no longer necessary, this is because acquiring/releasing the live kn lock inherently executes a cgroup get/put operation. [1] BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43 ---truncated---(CVE-2026-52991) In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check.(CVE-2026-52998) In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: remove sprintf usage Replace it with scnprintf, the buffer sizes are expected to be large enough to hold the result, no need for snprintf+overflow check. Increase buffer size in mangle_content_len() while at it. BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270 Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..](CVE-2026-53002) In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush().(CVE-2026-53049) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock.(CVE-2026-53072) In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1](CVE-2026-53115) In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied.(CVE-2026-53194) In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space.(CVE-2026-53195) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR signaling packets up to the channel MTU and dispatches each command without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer within radio range can send a fixed-channel CID 0x0001 packet that is larger than MTUsig and contains many L2CAP_ECHO_REQ commands before pairing. In a real-radio stock-kernel run, one 681-byte signaling packet containing 168 zero-length ECHO_REQ commands made the target transmit 168 ECHO_RSP frames over about 220 ms. Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling packet containing packed ECHO_REQ commands. Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched. The Bluetooth Core spec wording for MTUExceeded says the reject identifier shall match the first request command in the packet, and that packets containing only responses shall be silently discarded. Linux intentionally deviates from that prescription: silently discarding desynchronizes the peer because the remote stack never learns its responses were dropped, and locating the first request command requires walking command headers past MTUsig, i.e. processing bytes from a packet we have already decided is too large to process. We therefore always emit one reject and use the identifier from the first command header, a single fixed-offset byte read. The unrestricted BR/EDR signaling parser and ECHO_REQ response path both trace to the initial git import; no later introducing commit is available for a Fixes tag.(CVE-2026-53208) In the Linux kernel, the following vulnerability has been resolved: tcp: restrict SO_ATTACH_FILTER to priv users This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets to users with CAP_NET_ADMIN capability. This blocks potential side-channel attack where an unprivileged application attaches a filter to leak TCP sequence/acknowledgment numbers.(CVE-2026-53236) In the Linux kernel, the following vulnerability has been resolved: netlabel: validate unlabeled address and mask attribute lengths netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection.(CVE-2026-53238) In the Linux kernel, the following vulnerability has been resolved: net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr In mrp_pdu_parse_vecattr(), vector attribute events are encoded three per byte and valen tracks the number of events left to process. The parser decrements valen after processing the first and second events from each event byte, but not after processing the third one. When valen is exactly a multiple of three, the loop continues after the last valid event and consumes the next byte as a new event byte, applying a spurious event to the MRP applicant state. Additionally, when valen is zero the parser unconditionally consumes attrlen bytes as FirstValue and advances the offset, even though per IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of zero and no FirstValue or Vector fields. This corrupts the offset for subsequent PDU parsing. Also, when valen exceeds three the loop crosses byte boundaries but the attribute value is not incremented between the last event of one byte and the first event of the next. This causes the first event of the next byte to use the same attribute value as the third event rather than the next consecutive value. Decrement valen after processing the third event, skip FirstValue consumption when valen is zero, and increment the attribute value at the end of each loop iteration.(CVE-2026-53245) In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4.(CVE-2026-53249) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device.(CVE-2026-53252) In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits().(CVE-2026-53266) In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack_irc: fix possible out-of-bounds read When parsing fails after we've matched the command string we should bail out instead of trying to match a different command. This helper should be deprecated, given prevalence of TLS I doubt it has any relevance in 2026.(CVE-2026-53268) In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY.(CVE-2026-53269) In the Linux kernel, the following vulnerability has been resolved: ipvs: clear the svc scheduler ptr early on edit ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error code.(CVE-2026-53270) In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix use-after-free when processing MLD queries When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118 Workqueue: mld mld_query_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_address_description.constprop.0 (mm/kasan/report.c:378) print_report (mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) __mld_query_work (net/ipv6/mcast.c:1512) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> [...] Freed by task 118: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566) pskb_expand_head (net/core/skbuff.c:2335) __pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4)) __mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1)) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245)(CVE-2026-53275) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master.(CVE-2026-53357) An update for kernel is now available for openEuler-22.03-LTS-SP4/openEuler-22.03-LTS-SP3/openEuler-24.03-LTS/openEuler-24.03-LTS-SP2. openEuler Security has rated this update as having a security impact of critical. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. Critical kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43052 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43110 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43111 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43206 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45892 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45899 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45912 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52923 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52943 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52963 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52970 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52986 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52991 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-52998 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53002 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53049 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53072 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53115 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53194 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53195 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53208 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53236 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53238 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53245 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53249 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53252 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53266 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53268 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53269 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53270 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53275 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53357 https://nvd.nist.gov/vuln/detail/CVE-2026-43052 https://nvd.nist.gov/vuln/detail/CVE-2026-43110 https://nvd.nist.gov/vuln/detail/CVE-2026-43111 https://nvd.nist.gov/vuln/detail/CVE-2026-43206 https://nvd.nist.gov/vuln/detail/CVE-2026-45892 https://nvd.nist.gov/vuln/detail/CVE-2026-45899 https://nvd.nist.gov/vuln/detail/CVE-2026-45912 https://nvd.nist.gov/vuln/detail/CVE-2026-52923 https://nvd.nist.gov/vuln/detail/CVE-2026-52943 https://nvd.nist.gov/vuln/detail/CVE-2026-52963 https://nvd.nist.gov/vuln/detail/CVE-2026-52970 https://nvd.nist.gov/vuln/detail/CVE-2026-52986 https://nvd.nist.gov/vuln/detail/CVE-2026-52991 https://nvd.nist.gov/vuln/detail/CVE-2026-52998 https://nvd.nist.gov/vuln/detail/CVE-2026-53002 https://nvd.nist.gov/vuln/detail/CVE-2026-53049 https://nvd.nist.gov/vuln/detail/CVE-2026-53072 https://nvd.nist.gov/vuln/detail/CVE-2026-53115 https://nvd.nist.gov/vuln/detail/CVE-2026-53194 https://nvd.nist.gov/vuln/detail/CVE-2026-53195 https://nvd.nist.gov/vuln/detail/CVE-2026-53208 https://nvd.nist.gov/vuln/detail/CVE-2026-53236 https://nvd.nist.gov/vuln/detail/CVE-2026-53238 https://nvd.nist.gov/vuln/detail/CVE-2026-53245 https://nvd.nist.gov/vuln/detail/CVE-2026-53249 https://nvd.nist.gov/vuln/detail/CVE-2026-53252 https://nvd.nist.gov/vuln/detail/CVE-2026-53266 https://nvd.nist.gov/vuln/detail/CVE-2026-53268 https://nvd.nist.gov/vuln/detail/CVE-2026-53269 https://nvd.nist.gov/vuln/detail/CVE-2026-53270 https://nvd.nist.gov/vuln/detail/CVE-2026-53275 https://nvd.nist.gov/vuln/detail/CVE-2026-53357 openEuler-22.03-LTS-SP4 kernel-5.10.0-323.0.0.224.oe2203sp4.src.rpm bpftool-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm bpftool-debuginfo-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-debuginfo-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-debugsource-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-devel-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-headers-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-source-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-tools-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-tools-debuginfo-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm kernel-tools-devel-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm perf-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm perf-debuginfo-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm python3-perf-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm python3-perf-debuginfo-5.10.0-323.0.0.224.oe2203sp4.aarch64.rpm bpftool-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm bpftool-debuginfo-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-debuginfo-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-debugsource-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-devel-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-headers-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-source-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-tools-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-tools-debuginfo-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm kernel-tools-devel-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm perf-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm perf-debuginfo-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm python3-perf-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm python3-perf-debuginfo-5.10.0-323.0.0.224.oe2203sp4.x86_64.rpm In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers. 2026-07-09 CVE-2026-43052 openEuler-22.03-LTS-SP4 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix] 2026-07-09 CVE-2026-43110 openEuler-22.03-LTS-SP4 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex. 2026-07-09 CVE-2026-43111 openEuler-22.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation. 2026-07-09 CVE-2026-43206 openEuler-22.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache after doing PARTIAL_VALID1 zeroout When splitting an unwritten extent in the middle and converting it to initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent. Assume we have an unwritten file and buffered write in the middle of it without dioread_nolock enabled, it will allocate blocks as written extent. 0 A B N [UUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and leave the entire extent as unwritten. 0 A B N [UUUUUUUUUUUU] on-disk extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Z: zeroed data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and leave an written extent from A to N. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Finally ext4_map_create_blocks() only insert extent A to B to the extent status tree, and leave an stale unwritten extent in the status tree. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUWWWWWWWWUU] extent status tree [--DDDDDDDDZZ] Fix this issue by always cached extent status entry after zeroing out the second part. 2026-07-09 CVE-2026-45892 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache when splitting extent fails When the split extent fails, we might leave some extents still being processed and return an error directly, which will result in stale extent entries remaining in the extent status tree. So drop all of the remaining potentially stale extents if the splitting fails. 2026-07-09 CVE-2026-45899 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: hole Then, the outer calling functions will not correct this remaining hole extent either. Finally, if we perform a delayed buffer write on this latter part, it will re-insert the delayed extent and cause an error in space accounting. In adition, if the unwritten extent cache is not shrunk during the splitting, ext4_cache_extents() also conflicts with existing extents when caching extents. In the future, we will add checks when caching extents, which will trigger a warning. Therefore, Do not cache extents that are being split. 2026-07-09 CVE-2026-45912 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. 2026-07-09 CVE-2026-52923 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put(). 2026-07-09 CVE-2026-52943 openEuler-22.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI endpoint descriptor scans snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint descriptor size before using baAssocJackID[], but the descriptor walker can still return a class-specific endpoint descriptor whose bLength exceeds the remaining bytes in the endpoint-extra scan. That leaves later flexible-array reads bounded by bLength, but not by the remaining bytes in the endpoint-extra scan. Stop walking when bLength is zero or extends past the remaining endpoint-extra scan. 2026-07-09 CVE-2026-52963 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix missing expect put in obj eval nft_ct_expect_obj_eval() allocates an expectation and may call nf_ct_expect_related(), but never drops its local reference. Add nf_ct_expect_put(exp) before return to balance allocation. 2026-07-09 CVE-2026-52970 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu < 2026-07-09 CVE-2026-52986 openEuler-22.03-LTS-SP4 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: sched/psi: fix race between file release and pressure write A potential race condition exists between pressure write and cgroup file release regarding the priv member of struct kernfs_open_file, which triggers the uaf reported in [1]. Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards the memory deallocation of of->priv performed within cgroup_file_release(). However, the operations involving of->priv executed within pressure_write() are not entirely covered by the protection of cgroup_mutex. Consequently, if the code in pressure_write(), specifically the section handling the ctx variable executes after cgroup_file_release() has completed, a uaf vulnerability involving of->priv is triggered. Therefore, the issue can be resolved by extending the scope of the cgroup_mutex lock within pressure_write() to encompass all code paths involving of->priv, thereby properly synchronizing the race condition occurring between cgroup_file_release() and pressure_write(). And, if an live kn lock can be successfully acquired while executing the pressure write operation, it indicates that the cgroup deletion process has not yet reached its final stage; consequently, the priv pointer within open_file cannot be NULL. Therefore, the operation to retrieve the ctx value must be moved to a point *after* the live kn lock has been successfully acquired. In another situation, specifically after entering cgroup_kn_lock_live() but before acquiring cgroup_mutex, there exists a different class of race condition: CPU0: write memory.pressure CPU1: write cgroup.pressure=0 =========================== ============================= kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereference Consequently, there is a possibility that of->priv is NULL, the pressure write needs to check for this. Now that the scope of the cgroup_mutex has been expanded, the original explicit cgroup_get/put operations are no longer necessary, this is because acquiring/releasing the live kn lock inherently executes a cgroup get/put operation. [1] BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43 ---truncated--- 2026-07-09 CVE-2026-52991 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check. 2026-07-09 CVE-2026-52998 openEuler-22.03-LTS-SP4 High 7.5 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: remove sprintf usage Replace it with scnprintf, the buffer sizes are expected to be large enough to hold the result, no need for snprintf+overflow check. Increase buffer size in mangle_content_len() while at it. BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270 Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..] 2026-07-09 CVE-2026-53002 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush(). 2026-07-09 CVE-2026-53049 openEuler-22.03-LTS-SP4 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock. 2026-07-09 CVE-2026-53072 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] 2026-07-09 CVE-2026-53115 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. 2026-07-09 CVE-2026-53194 openEuler-22.03-LTS-SP4 Medium 5.3 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. 2026-07-09 CVE-2026-53195 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR signaling packets up to the channel MTU and dispatches each command without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer within radio range can send a fixed-channel CID 0x0001 packet that is larger than MTUsig and contains many L2CAP_ECHO_REQ commands before pairing. In a real-radio stock-kernel run, one 681-byte signaling packet containing 168 zero-length ECHO_REQ commands made the target transmit 168 ECHO_RSP frames over about 220 ms. Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling packet containing packed ECHO_REQ commands. Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched. The Bluetooth Core spec wording for MTUExceeded says the reject identifier shall match the first request command in the packet, and that packets containing only responses shall be silently discarded. Linux intentionally deviates from that prescription: silently discarding desynchronizes the peer because the remote stack never learns its responses were dropped, and locating the first request command requires walking command headers past MTUsig, i.e. processing bytes from a packet we have already decided is too large to process. We therefore always emit one reject and use the identifier from the first command header, a single fixed-offset byte read. The unrestricted BR/EDR signaling parser and ECHO_REQ response path both trace to the initial git import; no later introducing commit is available for a Fixes tag. 2026-07-09 CVE-2026-53208 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: tcp: restrict SO_ATTACH_FILTER to priv users This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets to users with CAP_NET_ADMIN capability. This blocks potential side-channel attack where an unprivileged application attaches a filter to leak TCP sequence/acknowledgment numbers. 2026-07-09 CVE-2026-53236 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netlabel: validate unlabeled address and mask attribute lengths netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection. 2026-07-09 CVE-2026-53238 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr In mrp_pdu_parse_vecattr(), vector attribute events are encoded three per byte and valen tracks the number of events left to process. The parser decrements valen after processing the first and second events from each event byte, but not after processing the third one. When valen is exactly a multiple of three, the loop continues after the last valid event and consumes the next byte as a new event byte, applying a spurious event to the MRP applicant state. Additionally, when valen is zero the parser unconditionally consumes attrlen bytes as FirstValue and advances the offset, even though per IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of zero and no FirstValue or Vector fields. This corrupts the offset for subsequent PDU parsing. Also, when valen exceeds three the loop crosses byte boundaries but the attribute value is not incremented between the last event of one byte and the first event of the next. This causes the first event of the next byte to use the same attribute value as the third event rather than the next consecutive value. Decrement valen after processing the third event, skip FirstValue consumption when valen is zero, and increment the attribute value at the end of each loop iteration. 2026-07-09 CVE-2026-53245 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4. 2026-07-09 CVE-2026-53249 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device. 2026-07-09 CVE-2026-53252 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). 2026-07-09 CVE-2026-53266 openEuler-22.03-LTS-SP4 High 8.8 AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack_irc: fix possible out-of-bounds read When parsing fails after we've matched the command string we should bail out instead of trying to match a different command. This helper should be deprecated, given prevalence of TLS I doubt it has any relevance in 2026. 2026-07-09 CVE-2026-53268 openEuler-22.03-LTS-SP4 High 8.2 AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY. 2026-07-09 CVE-2026-53269 openEuler-22.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ipvs: clear the svc scheduler ptr early on edit ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error code. 2026-07-09 CVE-2026-53270 openEuler-22.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix use-after-free when processing MLD queries When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118 Workqueue: mld mld_query_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_address_description.constprop.0 (mm/kasan/report.c:378) print_report (mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) __mld_query_work (net/ipv6/mcast.c:1512) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> [...] Freed by task 118: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566) pskb_expand_head (net/core/skbuff.c:2335) __pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4)) __mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1)) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) 2026-07-09 CVE-2026-53275 openEuler-22.03-LTS-SP4 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. 2026-07-09 CVE-2026-53357 openEuler-22.03-LTS-SP4 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-07-09 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2930