An update for kernel is now available for openEuler-24.03-LTS-SP3 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2026-2582 Final 1.0 1.0 2026-06-05 Initial 2026-06-05 2026-06-05 openEuler SA Tool V1.0 2026-06-05 kernel security update An update for kernel is now available for openEuler-24.03-LTS-SP3 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update.(CVE-2025-39833) In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Add support for Van Gogh SoC The ROG Xbox Ally (non-X) SoC features a similar architecture to the Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash), this support was dropped by the Xbox Ally which only S0ix suspend. Since the handler is missing here, this causes the device to not suspend and the AMD GPU driver to crash while trying to resume afterwards due to a power hang.(CVE-2025-68334) In the Linux kernel, the following vulnerability has been resolved: team: Move team device type change at the end of team_port_add Attempting to add a port device that is already up will expectedly fail, but not before modifying the team device header_ops. In the case of the syzbot reproducer the gre0 device is already in state UP when it attempts to add it as a port device of team0, this fails but before that header_ops->create of team0 is changed from eth_header to ipgre_header in the call to team_dev_type_check_change. Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense as the private data of the device still holds a struct team. Example sequence of iproute2 commands to reproduce the hang/BUG(): ip link add dev team0 type team ip link add dev gre0 type gre ip link set dev gre0 up ip link set dev gre0 master team0 ip link set dev team0 up ping -I team0 1.1.1.1 Move team_dev_type_check_change down where all other checks have passed as it changes the dev type with no way to restore it in case one of the checks that follow it fail. Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from dev This is done by adding a conditional before the call to dev_set_mtu to prevent it from assigning port_dev->mtu = dev->mtu and instead letting team_dev_type_check_change assign dev->mtu = port_dev->mtu. The conditional is needed because the patch moves the call to team_dev_type_check_change past dev_set_mtu. Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot(CVE-2025-68340) In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix neighbour use-after-free We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20(CVE-2025-68801) In the Linux kernel, the following vulnerability has been resolved: svcrdma: bound check rq_pages index in inline path svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without verifying rc_curpage stays within the allocated page array. Add guards before the first use and after advancing to a new page.(CVE-2025-71068) In the Linux kernel, the following vulnerability has been resolved: iavf: fix off-by-one issues in iavf_config_rss_reg() There are off-by-one bugs when configuring RSS hash key and lookup table, causing out-of-bounds reads to memory [1] and out-of-bounds writes to device registers. Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"), the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX which is safe since the value is the last valid index. That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4 where `rss_{key,lut}_size / 4` is the number of dwords, so the last valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=` accesses one element past the end. Fix the issues by using `<` instead of `<=`, ensuring we do not exceed the bounds. [1] KASAN splat about rss_key_size off-by-one BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800 Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63 CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: iavf iavf_watchdog_task Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x1a0 iavf_config_rss+0x619/0x800 iavf_watchdog_task+0x2be7/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 63: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x246/0x6f0 iavf_watchdog_task+0x28fc/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff888102c50100 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes to the right of allocated 52-byte region [ffff888102c50100, ffff888102c50134) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50 flags: 0x200000000000000(node=0|zone=2) page_type: f5(slab) raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc >ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ^ ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc(CVE-2025-71087) In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer Initialize the eb.vma array with values of 0 when the eb structure is first set up. In particular, this sets the eb->vma[i].vma pointers to NULL, simplifying cleanup and getting rid of the bug described below. During the execution of eb_lookup_vmas(), the eb->vma array is successively filled up with struct eb_vma objects. This process includes calling eb_add_vma(), which might fail; however, even in the event of failure, eb->vma[i].vma is set for the currently processed buffer. If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which prompts a call to eb_release_vmas() to clean up the mess. Since eb_lookup_vmas() might fail during processing any (possibly not first) buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know at what point did the lookup function fail. In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is set to NULL in case i915_gem_object_userptr_submit_init() fails; the current one needs to be cleaned up by eb_release_vmas() at this point, so the next one is set. If eb_add_vma() fails, neither the current nor the next vma is set to NULL, which is a source of a NULL deref bug described in the issue linked in the Closes tag. When entering eb_lookup_vmas(), the vma pointers are set to the slab poison value, instead of NULL. This doesn't matter for the actual lookup, since it gets overwritten anyway, however the eb_release_vmas() function only recognizes NULL as the stopping value, hence the pointers are being set to NULL as they go in case of intermediate failure. This patch changes the approach to filling them all with NULL at the start instead, rather than handling that manually during failure. (cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd)(CVE-2025-71130) In the Linux kernel, the following vulnerability has been resolved: net: dsa: properly keep track of conduit reference Problem description ------------------- DSA has a mumbo-jumbo of reference handling of the conduit net device and its kobject which, sadly, is just wrong and doesn't make sense. There are two distinct problems. 1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch: (unbind the conduit driver for net device eno2) echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind we see these lines in the output diff which appear only with the patch applied: kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000) kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000) 2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()). Actually we actually use that netdev tracker mechanism implicitly on user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link(). But time still passes at DSA switch probe time between the initial of_find_net_device_by_node() code and the user port creation time, time during which the conduit could unregister itself and DSA wouldn't know about it. So we have to run of_find_net_device_by_node() under rtnl_lock() to prevent that from happening, and release the lock only with the netdev tracker having acquired the reference. Do we need to keep the reference until dsa_unregister_switch() / dsa_switch_shutdown()? 1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference. 2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed. As for the conduit's kobject for the /sys/class/net/ entry, we don't care about it, we can release it as soon as we hold the net device object itself. History and blame attribution ----------------------------- The code has been refactored so many times, it is very difficult to follow and properly attribute a blame, but I'll try to make a short history which I hope to be correct. We have two distinct probing paths: - one for OF, introduced in 2016 i ---truncated---(CVE-2025-71152) In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock in wait_current_trans() due to ignored transaction type When wait_current_trans() is called during start_transaction(), it currently waits for a blocked transaction without considering whether the given transaction type actually needs to wait for that particular transaction state. The btrfs_blocked_trans_types[] array already defines which transaction types should wait for which transaction states, but this check was missing in wait_current_trans(). This can lead to a deadlock scenario involving two transactions and pending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction B This can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!) Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered extents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30 Fix this by passing the transaction type to wait_current_trans() and checking btrfs_blocked_trans_types[cur_trans->state] against the given type before deciding to wait. This ensures that transaction types which are allowed to join during certain blocked states will not unnecessarily wait and cause deadlocks.(CVE-2025-71194) In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/(CVE-2026-23001) In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_gre: make ipgre_header() robust Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246(CVE-2026-23011) In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: prevent pcp corruption with SMP=n The kernel test robot has reported: BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28 lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0 CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470 Call Trace: <IRQ> __dump_stack (lib/dump_stack.c:95) dump_stack_lvl (lib/dump_stack.c:123) dump_stack (lib/dump_stack.c:130) spin_dump (kernel/locking/spinlock_debug.c:71) do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?) _raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138) __free_frozen_pages (mm/page_alloc.c:2973) ___free_pages (mm/page_alloc.c:5295) __free_pages (mm/page_alloc.c:5334) tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290) ? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289) ? rcu_core (kernel/rcu/tree.c:?) rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861) rcu_core_si (kernel/rcu/tree.c:2879) handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623) __irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725) irq_exit_rcu (kernel/softirq.c:741) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052) </IRQ> <TASK> RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194) free_pcppages_bulk (mm/page_alloc.c:1494) drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632) __drain_all_pages (mm/page_alloc.c:2731) drain_all_pages (mm/page_alloc.c:2747) kcompactd (mm/compaction.c:3115) kthread (kernel/kthread.c:465) ? __cfi_kcompactd (mm/compaction.c:3166) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork (arch/x86/kernel/process.c:164) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) </TASK> Matthew has analyzed the report and identified that in drain_page_zone() we are in a section protected by spin_lock(&pcp->lock) and then get an interrupt that attempts spin_trylock() on the same lock. The code is designed to work this way without disabling IRQs and occasionally fail the trylock with a fallback. However, the SMP=n spinlock implementation assumes spin_trylock() will always succeed, and thus it's normally a no-op. Here the enabled lock debugging catches the problem, but otherwise it could cause a corruption of the pcp structure. The problem has been introduced by commit 574907741599 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme recognizes the need for disabling IRQs to prevent nesting spin_trylock() sections on SMP=n, but the need to prevent the nesting in spin_lock() has not been recognized. Fix it by introducing local wrappers that change the spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places that do spin_lock(&pcp->lock). [(CVE-2026-23025) In the Linux kernel, the following vulnerability has been resolved: net: hv_netvsc: reject RSS hash key programming without RX indirection table RSS configuration requires a valid RX indirection table. When the device reports a single receive queue, rndis_filter_device_add() does not allocate an indirection table, accepting RSS hash key updates in this state leads to a hang. Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return -EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device capabilities and prevents incorrect behavior.(CVE-2026-23054) In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <(CVE-2026-23074) In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().(CVE-2026-23100) In the Linux kernel, the following vulnerability has been resolved: tracing: Add recursion protection in kernel stack trace recording A bug was reported about an infinite recursion caused by tracing the rcu events with the kernel stack trace trigger enabled. The stack trace code called back into RCU which then called the stack trace again. Expand the ftrace recursion protection to add a set of bits to protect events from recursion. Each bit represents the context that the event is in (normal, softirq, interrupt and NMI). Have the stack trace code use the interrupt context to protect against recursion. Note, the bug showed an issue in both the RCU code as well as the tracing stacktrace code. This only handles the tracing stack trace side of the bug. The RCU fix will be handled separately.(CVE-2026-23138) In the Linux kernel, the following vulnerability has been resolved: tcp: secure_seq: add back ports to TS offset This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets") tcp_tw_recycle went away in 2017. Zhouyan Deng reported off-path TCP source port leakage via SYN cookie side-channel that can be fixed in multiple ways. One of them is to bring back TCP ports in TS offset randomization. As a bonus, we perform a single siphash() computation to provide both an ISN and a TS offset.(CVE-2026-23247) In the Linux kernel, a vulnerability exists in the AppArmor module's unpack_pdb function. The vulnerability occurs due to failure to validate that DFA start states are within bounds, which can lead to out-of-bound reads. An attacker can exploit this vulnerability through specially crafted policy files, potentially leading to information disclosure or system crashes.(CVE-2026-23269) In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches.(CVE-2026-23272) In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: validate USB endpoints The kaweth driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.(CVE-2026-23312) In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling.(CVE-2026-23340) In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.(CVE-2026-23378) In the Linux kernel, the following vulnerability has been resolved: ice: Fix memory leak in ice_set_ringparam() In ice_set_ringparam, tx_rings and xdp_rings are allocated before rx_rings. If the allocation of rx_rings fails, the code jumps to the done label leaking both tx_rings and xdp_rings. Furthermore, if the setup of an individual Rx ring fails during the loop, the code jumps to the free_tx label which releases tx_rings but leaks xdp_rings. Fix this by introducing a free_xdp label and updating the error paths to ensure both xdp_rings and tx_rings are properly freed if rx_rings allocation or setup fails. Compile tested only. Issue found using a prototype static analysis tool and code review.(CVE-2026-23389) In the Linux kernel, the following vulnerability has been resolved: apparmor: fix side-effect bug in match_char() macro usage The match_char() macro evaluates its character parameter multiple times when traversing differential encoding chains. When invoked with *str++, the string pointer advances on each iteration of the inner do-while loop, causing the DFA to check different characters at each iteration and therefore skip input characters. This results in out-of-bounds reads when the pointer advances past the input buffer boundary. [ 94.984676] ================================================================== [ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760 [ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976 [ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 94.986329] Call Trace: [ 94.986341] <TASK> [ 94.986347] dump_stack_lvl+0x5e/0x80 [ 94.986374] print_report+0xc8/0x270 [ 94.986384] ? aa_dfa_match+0x5ae/0x760 [ 94.986388] kasan_report+0x118/0x150 [ 94.986401] ? aa_dfa_match+0x5ae/0x760 [ 94.986405] aa_dfa_match+0x5ae/0x760 [ 94.986408] __aa_path_perm+0x131/0x400 [ 94.986418] aa_path_perm+0x219/0x2f0 [ 94.986424] apparmor_file_open+0x345/0x570 [ 94.986431] security_file_open+0x5c/0x140 [ 94.986442] do_dentry_open+0x2f6/0x1120 [ 94.986450] vfs_open+0x38/0x2b0 [ 94.986453] ? may_open+0x1e2/0x2b0 [ 94.986466] path_openat+0x231b/0x2b30 [ 94.986469] ? __x64_sys_openat+0xf8/0x130 [ 94.986477] do_file_open+0x19d/0x360 [ 94.986487] do_sys_openat2+0x98/0x100 [ 94.986491] __x64_sys_openat+0xf8/0x130 [ 94.986499] do_syscall_64+0x8e/0x660 [ 94.986515] ? count_memcg_events+0x15f/0x3c0 [ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986540] ? handle_mm_fault+0x1639/0x1ef0 [ 94.986551] ? vma_start_read+0xf0/0x320 [ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0 [ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0 [ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986588] ? irqentry_exit+0x3c/0x590 [ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 94.986597] RIP: 0033:0x7fda4a79c3ea Fix by extracting the character value before invoking match_char, ensuring single evaluation per outer loop.(CVE-2026-23406) In the Linux kernel, the following vulnerability has been resolved: apparmor: fix missing bounds check on DEFAULT table in verify_dfa() The verify_dfa() function only checks DEFAULT_TABLE bounds when the state is not differentially encoded. When the verification loop traverses the differential encoding chain, it reads k = DEFAULT_TABLE[j] and uses k as an array index without validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count, therefore, causes both out-of-bounds reads and writes. [ 57.179855] ================================================================== [ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660 [ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993 [ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 57.181563] Call Trace: [ 57.181572] <TASK> [ 57.181577] dump_stack_lvl+0x5e/0x80 [ 57.181596] print_report+0xc8/0x270 [ 57.181605] ? verify_dfa+0x59a/0x660 [ 57.181608] kasan_report+0x118/0x150 [ 57.181620] ? verify_dfa+0x59a/0x660 [ 57.181623] verify_dfa+0x59a/0x660 [ 57.181627] aa_dfa_unpack+0x1610/0x1740 [ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470 [ 57.181640] unpack_pdb+0x86d/0x46b0 [ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181656] ? aa_unpack_nameX+0x1a8/0x300 [ 57.181659] aa_unpack+0x20b0/0x4c30 [ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181664] ? stack_depot_save_flags+0x33/0x700 [ 57.181681] ? kasan_save_track+0x4f/0x80 [ 57.181683] ? kasan_save_track+0x3e/0x80 [ 57.181686] ? __kasan_kmalloc+0x93/0xb0 [ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130 [ 57.181697] ? policy_update+0x154/0x330 [ 57.181704] aa_replace_profiles+0x15a/0x1dd0 [ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181712] ? aa_loaddata_alloc+0x77/0x140 [ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181717] ? _copy_from_user+0x2a/0x70 [ 57.181730] policy_update+0x17a/0x330 [ 57.181733] profile_replace+0x153/0x1a0 [ 57.181735] ? rw_verify_area+0x93/0x2d0 [ 57.181740] vfs_write+0x235/0xab0 [ 57.181745] ksys_write+0xb0/0x170 [ 57.181748] do_syscall_64+0x8e/0x660 [ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 57.181765] RIP: 0033:0x7f6192792eb2 Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE entries unconditionally.(CVE-2026-23407) A race condition vulnerability exists in the AppArmor security module of the Linux kernel, leading to a use-after-free issue. This vulnerability can be triggered when an attacker simultaneously opens rawdata files and removes an associated AppArmor profile. Since rawdata inodes are not refcounted, there is a time window during profile removal where the i_private pointer may reference freed memory, causing the system to access freed memory regions. This can result in program crashes, unexpected value usage, or arbitrary code execution, threatening the confidentiality, integrity, and availability of the system.(CVE-2026-23410) A vulnerability exists in the AppArmor security module of the Linux kernel when handling the i_private field of the inode structure. AppArmor was putting the reference to i_private data on its end after removing the original entry from the file system. However the inode can and does live beyond that point and it is possible that some of the fs callback functions will be invoked after the reference has been put, which results in a race between freeing the data and accessing it through the fs. While the rawdata/loaddata is the most likely candidate to fail the race, as it has the fewest references. If properly crafted it might be possible to trigger a race for the other types stored in i_private. This vulnerability could allow a local attacker to bypass AppArmor's access control policies through a specially crafted request, leading to privilege escalation and impacting system confidentiality, integrity, and availability.(CVE-2026-23411) In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0 (success) without actually creating a socket. Callers such as fou_create() then proceed to dereference the uninitialized socket pointer, resulting in a NULL pointer dereference. The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: <TASK> genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130) This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so callers correctly take their error paths. There is only one caller of the vulnerable function and only privileged users can trigger it.(CVE-2026-23439) In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race condition during IPSec ESN update In IPSec full offload mode, the device reports an ESN (Extended Sequence Number) wrap event to the driver. The driver validates this event by querying the IPSec ASO and checking that the esn_event_arm field is 0x0, which indicates an event has occurred. After handling the event, the driver must re-arm the context by setting esn_event_arm back to 0x1. A race condition exists in this handling path. After validating the event, the driver calls mlx5_accel_esp_modify_xfrm() to update the kernel's xfrm state. This function temporarily releases and re-acquires the xfrm state lock. So, need to acknowledge the event first by setting esn_event_arm to 0x1. This prevents the driver from reprocessing the same ESN update if the hardware sends events for other reason. Since the next ESN update only occurs after nearly 2^31 packets are received, there's no risk of missing an update, as it will happen long after this handling has finished. Processing the event twice causes the ESN high-order bits (esn_msb) to be incremented incorrectly. The driver then programs the hardware with this invalid ESN state, which leads to anti-replay failures and a complete halt of IPSec traffic. Fix this by re-arming the ESN event immediately after it is validated, before calling mlx5_accel_esp_modify_xfrm(). This ensures that any spurious, duplicate events are correctly ignored, closing the race window.(CVE-2026-23440) In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent concurrent access to IPSec ASO context The query or updating IPSec offload object is through Access ASO WQE. The driver uses a single mlx5e_ipsec_aso struct for each PF, which contains a shared DMA-mapped context for all ASO operations. A race condition exists because the ASO spinlock is released before the hardware has finished processing WQE. If a second operation is initiated immediately after, it overwrites the shared context in the DMA area. When the first operation's completion is processed later, it reads this corrupted context, leading to unexpected behavior and incorrect results. This commit fixes the race by introducing a private context within each IPSec offload object. The shared ASO context is now copied to this private context while the ASO spinlock is held. Subsequent processing uses this saved, per-object context, ensuring its integrity is maintained.(CVE-2026-23441) In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure ieee80211_tx_prepare_skb() has three error paths, but only two of them free the skb. The first error path (ieee80211_tx_prepare() returning TX_DROP) does not free it, while invoke_tx_handlers() failure and the fragmentation check both do. Add kfree_skb() to the first error path so all three are consistent, and remove the now-redundant frees in callers (ath9k, mt76, mac80211_hwsim) to avoid double-free. Document the skb ownership guarantee in the function's kdoc.(CVE-2026-23444) In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly.(CVE-2026-23448) In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock() Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1]. smc_tcp_syn_recv_sock() is called in the TCP receive path (softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP listening socket). It reads sk_user_data to get the smc_sock pointer. However, when the SMC listen socket is being closed concurrently, smc_close_active() sets clcsock->sk_user_data to NULL under sk_callback_lock, and then the smc_sock itself can be freed via sock_put() in smc_release(). This leads to two issues: 1) NULL pointer dereference: sk_user_data is NULL when accessed. 2) Use-after-free: sk_user_data is read as non-NULL, but the smc_sock is freed before its fields (e.g., queued_smc_hs, ori_af_ops) are accessed. The race window looks like this (the syzkaller crash [1] triggers via the SYN cookie path: tcp_get_cookie_sock() -> smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path has the same race): CPU A (softirq) CPU B (process ctx) tcp_v4_rcv() TCP_NEW_SYN_RECV: sk = req->rsk_listener sock_hold(sk) /* No lock on listener */ smc_close_active(): write_lock_bh(cb_lock) sk_user_data = NULL write_unlock_bh(cb_lock) ... smc_clcsock_release() sock_put(smc->sk) x2 -> smc_sock freed! tcp_check_req() smc_tcp_syn_recv_sock(): smc = user_data(sk) -> NULL or dangling smc->queued_smc_hs -> crash! Note that the clcsock and smc_sock are two independent objects with separate refcounts. TCP stack holds a reference on the clcsock, which keeps it alive, but this does NOT prevent the smc_sock from being freed. Fix this by using RCU and refcount_inc_not_zero() to safely access smc_sock. Since smc_tcp_syn_recv_sock() is called in the TCP three-way handshake path, taking read_lock_bh on sk_callback_lock is too heavy and would not survive a SYN flood attack. Using rcu_read_lock() is much more lightweight. - Set SOCK_RCU_FREE on the SMC listen socket so that smc_sock freeing is deferred until after the RCU grace period. This guarantees the memory is still valid when accessed inside rcu_read_lock(). - Use rcu_read_lock() to protect reading sk_user_data. - Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the smc_sock. If the refcount has already reached zero (close path completed), it returns false and we bail out safely. Note: smc_hs_congested() has a similar lockless read of sk_user_data without rcu_read_lock(), but it only checks for NULL and accesses the global smc_hs_wq, never dereferencing any smc_sock field, so it is not affected. Reproducer was verified with mdelay injection and smc_run, the issue no longer occurs with this patch applied. [1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9(CVE-2026-23450) In the Linux kernel, the following vulnerability has been resolved: PM: runtime: Fix a race condition related to device removal The following code in pm_runtime_work() may dereference the dev->parent pointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); } Fix this by inserting a flush_work() call in pm_runtime_remove(). Without this patch blktest block/001 triggers the following complaint sporadically: BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160 Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081 Workqueue: pm pm_runtime_work Call Trace: <TASK> dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810(CVE-2026-23452) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to conn->users. However, l2cap_register_user() and l2cap_unregister_user() don't use conn->lock, creating a race condition where these functions can access conn->users and conn->hchan concurrently with l2cap_conn_del(). This can lead to use-after-free and list corruption bugs, as reported by syzbot. Fix this by changing l2cap_register_user() and l2cap_unregister_user() to use conn->lock instead of hci_dev_lock(), ensuring consistent locking for the l2cap_conn structure.(CVE-2026-23461) Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.(CVE-2026-23473) In the Linux kernel, the following vulnerability has been resolved: spi: fix statistics allocation The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres).(CVE-2026-23475) In the Linux kernel, the following vulnerability has been resolved: smb: client: fix krb5 mount with username option Customer reported that some of their krb5 mounts were failing against a single server as the client was trying to mount the shares with wrong credentials. It turned out the client was reusing SMB session from first mount to try mounting the other shares, even though a different username= option had been specified to the other mounts. By using username mount option along with sec=krb5 to search for principals from keytab is supported by cifs.upcall(8) since cifs-utils-4.8. So fix this by matching username mount option in match_session() even with Kerberos. For example, the second mount below should fail with -ENOKEY as there is no 'foobar' principal in keytab (/etc/krb5.keytab). The client ends up reusing SMB session from first mount to perform the second one, which is wrong. ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for (CVE-2026-31392) In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix incorrect pte restoration for lazyfree folios We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the batch has a mix of writable and non-writable bits, we may end up setting the entire batch writable. Fix this by respecting writable bit during batching. Although on a successful unmap of a lazyfree folio, the soft-dirty bit is lost, preserve it on pte restoration by respecting the bit during batching, to make the fix consistent w.r.t both writable bit and soft-dirty bit. I was able to write the below reproducer and crash the kernel. Explanation of reproducer (set 64K mTHP to always): Fault in a 64K large folio. Split the VMA at mid-point with MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do MADV_FREE on the range to mark the folio as lazyfree. Write to the memory to dirty the pte, eventually rmap will dirty the folio. Then trigger reclaim, we will hit the pte restoration path, and the kernel will crash with the trace given below. The BUG happens at: BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw); The code path is asking for anonymous page to be mapped writable into the pagetable. The BUG_ON() firing implies that such a writable page has been mapped into the pagetables of more than one process, which breaks anonymous memory/CoW semantics. [ 21.134473] kernel BUG at mm/page_table_check.c:118! [ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 21.135917] Modules linked in: [ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT [ 21.136858] Hardware name: linux,dummy-virt (DT) [ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 21.137308] pc : page_table_check_set+0x28c/0x2a8 [ 21.137607] lr : page_table_check_set+0x134/0x2a8 [ 21.137885] sp : ffff80008a3b3340 [ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000 [ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001 [ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30 [ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000 [ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff [ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020 [ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0 [ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff [ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002 [ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0 [ 21.141991] Call trace: [ 21.142093] page_table_check_set+0x28c/0x2a8 (P) [ 21.142265] __page_table_check_ptes_set+0x144/0x1e8 [ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8 [ 21.142766] contpte_set_ptes+0xe8/0x140 [ 21.142907] try_to_unmap_one+0x10c4/0x10d0 [ 21.143177] rmap_walk_anon+0x100/0x250 [ 21.143315] try_to_unmap+0xa0/0xc8 [ 21.143441] shrink_folio_list+0x59c/0x18a8 [ 21.143759] shrink_lruvec+0x664/0xbf0 [ 21.144043] shrink_node+0x218/0x878 [ 21.144285] __node_reclaim.constprop.0+0x98/0x338 [ 21.144763] user_proactive_reclaim+0x2a4/0x340 [ 21.145056] reclaim_store+0x3c/0x60 [ 21.145216] dev_attr_store+0x20/0x40 [ 21.145585] sysfs_kf_write+0x84/0xa8 [ 21.145835] kernfs_fop_write_iter+0x130/0x1c8 [ 21.145994] vfs_write+0x2b8/0x368 [ 21.146119] ksys_write+0x70/0x110 [ 21.146240] __arm64_sys_write+0x24/0x38 [ 21.146380] invoke_syscall+0x50/0x120 [ 21.146513] el0_svc_common.constprop.0+0x48/0xf8 [ 21.146679] do_el0_svc+0x28/0x40 [ 21.146798] el0_svc+0x34/0x110 [ 21.146926] el0t ---truncated---(CVE-2026-31398) In the Linux kernel, the following vulnerability has been resolved: nvdimm/bus: Fix potential use after free in asynchronous initialization Dingisoul with KASAN reports a use after free if device_add() fails in nd_async_device_register(). Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init") correctly added a reference on the parent device to be held until asynchronous initialization was complete. However, if device_add() results in an allocation failure the ref count of the device drops to 0 prior to the parent pointer being accessed. Thus resulting in use after free. The bug bot AI correctly identified the fix. Save a reference to the parent pointer to be used to drop the parent reference regardless of the outcome of device_add().(CVE-2026-31399) In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix cache_request leak in cache_release When a reader's file descriptor is closed while in the middle of reading a cache_request (rp->offset != 0), cache_release() decrements the request's readers count but never checks whether it should free the request. In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the cache_request is removed from the queue and freed along with its buffer and cache_head reference. cache_release() lacks this cleanup. The only other path that frees requests with readers == 0 is cache_dequeue(), but it runs only when CACHE_PENDING transitions from set to clear. If that transition already happened while readers was still non-zero, cache_dequeue() will have skipped the request, and no subsequent call will clean it up. Add the same cleanup logic from cache_read() to cache_release(): after decrementing readers, check if it reached 0 with CACHE_PENDING clear, and if so, dequeue and free the cache_request.(CVE-2026-31400) In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage.(CVE-2026-31403) In the Linux kernel, the Bluetooth SCO module's sco_recv_frame() function contains a use-after-free vulnerability. The function reads conn->sk under sco_conn_lock() but immediately releases the lock without holding a reference to the socket. A concurrent close() operation can free the socket between the lock release and the subsequent sk->sk_state access, resulting in a use-after-free vulnerability. Other functions in the same file (sco_sock_timeout(), sco_conn_del()) correctly use sco_sock_hold() to safely hold references under the lock. The vulnerability is fixed by using sco_sock_hold() to acquire a reference before releasing the lock and adding sock_put() on all exit paths.(CVE-2026-31408) In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)(CVE-2026-31421) In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] =======================================================================(CVE-2026-31422) In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC(CVE-2026-31426) In the Linux kernel, the following vulnerability has been resolved: net: skb: fix cross-cache free of KFENCE-allocated skb head SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2 value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc bucket sizes. This ensures that skb_kfree_head() can reliably use skb_end_offset to distinguish skb heads allocated from skb_small_head_cache vs. generic kmalloc caches. However, when KFENCE is enabled, kfence_ksize() returns the exact requested allocation size instead of the slab bucket size. If a caller (e.g. bpf_test_init) allocates skb head data via kzalloc() and the requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then slab_build_skb() -> ksize() returns that exact value. After subtracting skb_shared_info overhead, skb_end_offset ends up matching SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free the object to skb_small_head_cache instead of back to the original kmalloc cache, resulting in a slab cross-cache free: kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected skbuff_small_head but got kmalloc-1k Fix this by always calling kfree(head) in skb_kfree_head(). This keeps the free path generic and avoids allocator-specific misclassification for KFENCE objects.(CVE-2026-31429) In the Linux kernel, the following vulnerability has been resolved: X.509: Fix out-of-bounds access when parsing extensions Leo reports an out-of-bounds access when parsing a certificate with empty Basic Constraints or Key Usage extension because the first byte of the extension is read before checking its length. Fix it. The bug can be triggered by an unprivileged user by submitting a specially crafted certificate to the kernel through the keyrings(7) API. Leo has demonstrated this with a proof-of-concept program responsibly disclosed off-list.(CVE-2026-31430) In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix memory leak when a wq is reset idxd_wq_disable_cleanup() which is called from the reset path for a workqueue, sets the wq type to NONE, which for other parts of the driver mean that the wq is empty (all its resources were released). Only set the wq type to NONE after its resources are released.(CVE-2026-31441) In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes.(CVE-2026-31442) In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call.(CVE-2026-31446) In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code.(CVE-2026-31449) In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.(CVE-2026-31450) In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption.(CVE-2026-31451) In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.(CVE-2026-31452) In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path.(CVE-2026-31467) In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns(CVE-2026-31469) In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n".(CVE-2026-31487) In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree.(CVE-2026-31495) In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc").(CVE-2026-31496) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ertm_init() and l2cap_chan_ready() when the channel is already in BT_CONNECTED state, while still allowing the reconfiguration parameters to be updated through l2cap_parse_conf_req(). Also add a pdu_len zero check in l2cap_segment_sdu() as a safeguard.(CVE-2026-31498) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del().(CVE-2026-31499) In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8(CVE-2026-31505) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb Before using sk pointer, check if it is null. Fix the following: KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267] CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025 Workqueue: events l2cap_info_timeout RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce veth0_macvtap: entered promiscuous mode RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0 PKRU: 55555554 Call Trace: <TASK> __kasan_check_byte+0x12/0x40 lock_acquire+0x79/0x2e0 lock_sock_nested+0x48/0x100 ? l2cap_sock_ready_cb+0x46/0x160 l2cap_sock_ready_cb+0x46/0x160 l2cap_conn_start+0x779/0xff0 ? __pfx_l2cap_conn_start+0x10/0x10 ? l2cap_info_timeout+0x60/0xa0 ? __pfx___mutex_lock+0x10/0x10 l2cap_info_timeout+0x68/0xa0 ? process_scheduled_works+0xa8d/0x18c0 process_scheduled_works+0xb6e/0x18c0 ? __pfx_process_scheduled_works+0x10/0x10 ? assign_work+0x3d5/0x5e0 worker_thread+0xa53/0xfc0 kthread+0x388/0x470 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x51e/0xb90 ? __pfx_ret_from_fork+0x10/0x10 veth1_macvtap: entered promiscuous mode ? __switch_to+0xc7d/0x1450 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- batman_adv: batadv0: Interface activated: batadv_slave_0 batman_adv: batadv0: Interface activated: batadv_slave_1 netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception(CVE-2026-31510) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory.(CVE-2026-31511) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv() l2cap_ecred_data_rcv() reads the SDU length field from skb->data using get_unaligned_le16() without first verifying that skb contains at least L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads past the valid data in the skb. The ERTM reassembly path correctly calls pskb_may_pull() before reading the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the same validation to the Enhanced Credit Based Flow Control data path.(CVE-2026-31512) In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net.(CVE-2026-31516) In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error.(CVE-2026-31518) In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs().(CVE-2026-31525) In the Linux kernel, the following vulnerability has been resolved: perf: Make sure to use pmu_ctx->pmu for groups Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access when group_sched_in() fails and needs to roll back. This *should* be handled by the transaction callbacks, but he found that when the group leader is a software event, the transaction handlers of the wrong PMU are used. Despite the move_group case in perf_event_open() and group_sched_in() using pmu_ctx->pmu. Turns out, inherit uses event->pmu to clone the events, effectively undoing the move_group case for all inherited contexts. Fix this by also making inherit use pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context. Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the group case.(CVE-2026-31528) In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048(CVE-2026-31531) In the Linux kernel, the following vulnerability has been resolved: can: raw: fix ro->uniq use-after-free in raw_rcv() raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. [mkl: applied manually](CVE-2026-31532) In the Linux kernel, the following vulnerability has been resolved: net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption The -EBUSY handling in tls_do_encryption(), introduced by commit 859054147318 ("net: tls: handle backlogging of crypto requests"), has a use-after-free due to double cleanup of encrypt_pending and the scatterlist entry. When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to the cryptd backlog and the async callback tls_encrypt_done() will be invoked upon completion. That callback unconditionally restores the scatterlist entry (sge->offset, sge->length) and decrements ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an error, the synchronous error path in tls_do_encryption() performs the same cleanup again, double-decrementing encrypt_pending and double-restoring the scatterlist. The double-decrement corrupts the encrypt_pending sentinel (initialized to 1), making tls_encrypt_async_wait() permanently skip the wait for pending async callbacks. A subsequent sendmsg can then free the tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still pending, resulting in a use-after-free when the callback fires on the freed record. Fix this by skipping the synchronous cleanup when the -EBUSY async wait returns an error, since the callback has already handled encrypt_pending and sge restoration.(CVE-2026-31533) In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Check set_default_submission() before deferencing When the i915 driver firmware binaries are not present, the set_default_submission pointer is not set. This pointer is dereferenced during suspend anyways. Add a check to make sure it is set before dereferencing. [ 23.289926] PM: suspend entry (deep) [ 23.293558] Filesystems sync: 0.000 seconds [ 23.298010] Freezing user space processes [ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds) [ 23.309766] OOM killer disabled. [ 23.313027] Freezing remaining freezable tasks [ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 23.342038] serial 00:05: disabled [ 23.345719] serial 00:02: disabled [ 23.349342] serial 00:01: disabled [ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 23.361635] ata1.00: Entering standby power mode [ 23.368863] ata2.00: Entering standby power mode [ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 23.452194] #PF: supervisor instruction fetch in kernel mode [ 23.457896] #PF: error_code(0x0010) - not-present page [ 23.463065] PGD 0 P4D 0 [ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI [ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary) [ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 23.496511] Workqueue: async async_run_entry_fn [ 23.501087] RIP: 0010:0x0 [ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246 [ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f [ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000 [ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff [ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8 [ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68 [ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000 [ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0 [ 23.572539] PKRU: 55555554 [ 23.575281] Call Trace: [ 23.577770] <TASK> [ 23.579905] intel_engines_reset_default_submission+0x42/0x60 [ 23.585695] __intel_gt_unset_wedged+0x191/0x200 [ 23.590360] intel_gt_unset_wedged+0x20/0x40 [ 23.594675] gt_sanitize+0x15e/0x170 [ 23.598290] i915_gem_suspend_late+0x6b/0x180 [ 23.602692] i915_drm_suspend_late+0x35/0xf0 [ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10 [ 23.611843] dpm_run_callback+0x78/0x1c0 [ 23.615817] device_suspend_late+0xde/0x2e0 [ 23.620037] async_suspend_late+0x18/0x30 [ 23.624082] async_run_entry_fn+0x25/0xa0 [ 23.628129] process_one_work+0x15b/0x380 [ 23.632182] worker_thread+0x2a5/0x3c0 [ 23.635973] ? __pfx_worker_thread+0x10/0x10 [ 23.640279] kthread+0xf6/0x1f0 [ 23.643464] ? __pfx_kthread+0x10/0x10 [ 23.647263] ? __pfx_kthread+0x10/0x10 [ 23.651045] ret_from_fork+0x131/0x190 [ 23.654837] ? __pfx_kthread+0x10/0x10 [ 23.658634] ret_from_fork_asm+0x1a/0x30 [ 23.662597] </TASK> [ 23.664826] Modules linked in: [ 23.667914] CR2: 0000000000000000 [ 23.671271] ------------[ cut here ]------------ (cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)(CVE-2026-31540) In the Linux kernel, the following vulnerability has been resolved: x86/platform/uv: Handle deconfigured sockets When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes a panic while allocating UV hub info structures. Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be allocated on valid nodes.(CVE-2026-31542) In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave.(CVE-2026-31546) In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi.(CVE-2026-31555) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence from amdgpu_ib_schedule(). This fence is used to wait for job completion. Currently, the code drops the fence reference using dma_fence_put() before calling dma_fence_wait(). If dma_fence_put() releases the last reference, the fence may be freed before dma_fence_wait() is called. This can lead to a use-after-free. Fix this by waiting on the fence first and releasing the reference only after dma_fence_wait() completes. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696) (cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)(CVE-2026-31566) In the Linux kernel, the following vulnerability has been resolved: can: gw: fix OOB heap access in cgw_csum_crc8_rel() cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index */ cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.(CVE-2026-31570) In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION Drop the WARN in sev_pin_memory() on npages overflowing an int, as the WARN is comically trivially to trigger from userspace, e.g. by doing: struct kvm_enc_region range = { .addr = 0, .size = -1ul, }; __vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range); Note, the checks in sev_mem_enc_register_region() that presumably exist to verify the incoming address+size are completely worthless, as both "addr" and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater than ULONG_MAX. That wart will be cleaned up in the near future. if (range->addr > ULONG_MAX || range->size > ULONG_MAX) return -EINVAL; Opportunistically add a comment to explain why the code calculates the number of pages the "hard" way, e.g. instead of just shifting @ulen.(CVE-2026-31590) In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup Disable the delayed work before clearing BAR mappings and doorbells to avoid running the handler after resources have been torn down. Unable to handle kernel paging request at virtual address ffff800083f46004 [...] Internal error: Oops: 0000000096000007 [#1] SMP [...] Call trace: epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P) process_one_work+0x154/0x3b0 worker_thread+0x2c8/0x400 kthread+0x148/0x210 ret_from_fork+0x10/0x20(CVE-2026-31595) In the Linux kernel, the following vulnerability has been resolved: x86/CPU: Fix FPDSS on Zen1 Zen1's hardware divider can leave, under certain circumstances, partial results from previous operations. Those results can be leaked by another, attacker thread. Fix that with a chicken bit.(CVE-2026-31628) In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example(CVE-2026-31630) In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix NULL-deref on disconnect Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free.(CVE-2026-31651) In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0(CVE-2026-31665) In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)(CVE-2026-31667) In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_netem: fix out-of-bounds access in packet corruption In netem_enqueue(), the packet corruption logic uses get_random_u32_below(skb_headlen(skb)) to select an index for modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0. Passing 0 to get_random_u32_below() takes the variable-ceil slow path which returns an unconstrained 32-bit random integer. Using this unconstrained value as an offset into skb->data results in an out-of-bounds memory access. Fix this by verifying skb_headlen(skb) is non-zero before attempting to corrupt the linear data area. Fully non-linear packets will silently bypass the corruption logic.(CVE-2026-31675) In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - limit RX SG extraction by receive buffer budget Make af_alg_get_rsgl() limit each RX scatterlist extraction to the remaining receive buffer budget. af_alg_get_rsgl() currently uses af_alg_readable() only as a gate before extracting data into the RX scatterlist. Limit each extraction to the remaining af_alg_rcvbuf(sk) budget so that receive-side accounting matches the amount of data attached to the request. If skcipher cannot obtain enough RX space for at least one chunk while more data remains to be processed, reject the recvmsg call instead of rounding the request length down to zero.(CVE-2026-31677) In the Linux kernel, the following vulnerability has been resolved: openvswitch: defer tunnel netdev_put to RCU release ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already detached the device. Dropping the netdev reference in destroy can race with concurrent readers that still observe vport->dev. Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let vport_netdev_free() drop the reference from the RCU callback, matching the non-tunnel destroy path and avoiding additional synchronization under RTNL.(CVE-2026-31678) In the Linux kernel, a memory out-of-bounds access vulnerability exists in the act_csum module's tcf_csum_act() function when processing nested VLAN headers. When an skb still carries in-payload VLAN tags, the function walks nested VLAN headers directly from skb->data. The current code reads vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without first ensuring that the full VLAN header is present in the linear area. If only part of an inner VLAN header is linearized, accessing h_vlan_encapsulated_proto reads past the linear area, and the following skb_pull(VLAN_HLEN) may violate skb invariants.(CVE-2026-31684) In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`.(CVE-2026-31685) In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch.(CVE-2026-31689) In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed When retrieving the ID for the CPU, don't attempt to copy the ID blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222 sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error.(CVE-2026-31697) In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed When retrieving the PDH cert, don't attempt to copy the blobs to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033 CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347 sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error.(CVE-2026-31698) In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed When retrieving the PEK CSR, don't attempt to copy the blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405 CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872 sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error.(CVE-2026-31699) In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds.(CVE-2026-31708) In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.(CVE-2026-31738) In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.(CVE-2026-31752) In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready.(CVE-2026-31755) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt().(CVE-2026-31771) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated.(CVE-2026-31773) In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler() The memcpy function assumes the dynamic array notif->matches is at least as large as the number of bytes to copy. Otherwise, results->matches may contain unwanted data. To guarantee safety, extend the validation in one of the checks to ensure sufficient packet length. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2026-31779) In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list.(CVE-2026-31781) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state.(CVE-2026-43020) In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407(CVE-2026-43036) In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.(CVE-2026-43040) In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end of the previous SGL when performing sg_chain() in af_alg_alloc_tsgl().(CVE-2026-43043) In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized.(CVE-2026-43061) In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix not releasing workqueue on .release() The workqueue associated with an DSA/IAA device is not released when the object is freed.(CVE-2026-43064) In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Skip discovery table for offline dies This warning can be triggered if NUMA is disabled and the system boots with fewer CPUs than the number of CPUs in die 0. WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore] Currently, the discovery table continues to be parsed even if all CPUs in the associated die are offline. This can lead to an array overflow at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may trigger the warning above or cause other issues.(CVE-2026-43079) In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: fix null-ptr-deref in icmp_build_probe() ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing this error pointer to dev_hold() will cause a kernel crash with null-ptr-deref. Instead, silently discard the request. RFC 8335 does not appear to define a specific response for the case where an IPv6 interface identifier is syntactically valid but the implementation cannot perform the lookup at runtime, and silently dropping the request may safer than misreporting "No Such Interface".(CVE-2026-43099) In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() As kcalloc() may fail, check its return value to avoid a NULL pointer dereference when passing it to of_property_read_u32_array().(CVE-2026-43148) In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time, and avoid triggering assertion. Similar fix to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") - commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking")(CVE-2026-43156) In the Linux kernel, the following vulnerability has been resolved: md/bitmap: fix GPF in write_page caused by resize race A General Protection Fault occurs in write_page() during array resize: RIP: 0010:write_page+0x22b/0x3c0 [md_mod] This is a use-after-free race between bitmap_daemon_work() and __bitmap_resize(). The daemon iterates over `bitmap->storage.filemap` without locking, while the resize path frees that storage via md_bitmap_file_unmap(). `quiesce()` does not stop the md thread, allowing concurrent access to freed pages. Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.(CVE-2026-43163) In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00).(CVE-2026-43186) In the Linux kernel, the following vulnerability has been resolved: LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which is a valid index - so add a check for this.(CVE-2026-43212) In the Linux kernel, the following vulnerability has been resolved: x86/kexec: add a sanity check on previous kernel's ima kexec buffer When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>", the physical range that contains the carried over IMA measurement list may fall outside the truncated RAM leading to a kernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) – not-present page Other architectures already validate the range with page_is_ram(), as done in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") do a similar check on x86. Without carrying the measurement list across kexec, the attestation would fail.(CVE-2026-43240) In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742.(CVE-2026-43262) In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph (CVE-2026-43273) In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none) RIP: 0010:percpu_counter_add_batch+0x13/0xa0 Call Trace: <TASK> ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/test With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads and validates the block bitmap. When the validation fails, ext4_mark_group_bitmap_corrupted() attempts to update sbi->s_freeclusters_counter. However, this percpu_counter has not been initialized yet at this point, which leads to the panic described above. Fix this by moving the execution of ext4_percpu_param_init() to occur before ext4_mb_init(), ensuring the per-CPU counters are initialized before they are used.(CVE-2026-43288) In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during vmalloc cleanup triggers expensive stack unwinding that acquires RCU read locks. Processing a large purge_list without rescheduling can cause the task to hold CPU for extended periods (10+ seconds), leading to RCU stalls and potential OOM conditions. The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node() where iterating through hundreds or thousands of vmap_area entries and freeing their associated shadow pages causes: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l ... task:kworker/0:17 state:R running task stack:28840 pid:6229 ... kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299 purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299 Each call to kasan_release_vmalloc() can free many pages, and with page_owner tracking, each free triggers save_stack() which performs stack unwinding under RCU read lock. Without yielding, this creates an unbounded RCU critical section. Add periodic cond_resched() calls within the loop to allow: - RCU grace periods to complete - Other tasks to run - Scheduler to preempt when needed The fix uses need_resched() for immediate response under load, with a batch count of 32 as a guaranteed upper bound to prevent worst-case stalls even under light load.(CVE-2026-43292) In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix event ring index not programmed for IPA v5.0+ For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to CH_C_CNTXT_1. The v5.0 register definition intended to define this field in the CH_C_CNTXT_1 fmask array but used the old identifier of ERINDEX instead of CH_ERINDEX. Without a valid event ring, GSI channels could never signal transfer completions. This caused gsi_channel_trans_quiesce() to block forever in wait_for_completion(). At least for IPA v5.2 this resolves an issue seen where runtime suspend, system suspend, and remoteproc stop all hanged forever. It also meant the IPA data path was completely non functional.(CVE-2026-43345) In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.(CVE-2026-43366) In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header.(CVE-2026-43406) In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning.(CVE-2026-43419) In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.(CVE-2026-43427) In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout.(CVE-2026-43428) In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix deadlock between devlink lock and esw->wq esw->work_queue executes esw_functions_changed_event_handler -> esw_vfs_changed_event_handler and acquires the devlink lock. .eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) -> mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked -> mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks when esw_vfs_changed_event_handler executes. Fix that by no longer flushing the work to avoid the deadlock, and using a generation counter to keep track of work relevance. This avoids an old handler manipulating an esw that has undergone one or more mode changes: - the counter is incremented in mlx5_eswitch_event_handler_unregister. - the counter is read and passed to the ephemeral mlx5_host_work struct. - the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on. - mlx5_eswitch_cleanup does the final draining before destroying the wq. No longer flushing the workqueue has the side effect of maybe no longer cancelling pending vport_change_handler work items, but that's ok since those are disabled elsewhere: - mlx5_eswitch_disable_locked disables the vport eq notifier. - mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything. - mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished.(CVE-2026-43468) In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix handling of MAY_BACKLOG requests MAY_BACKLOG requests can return EBUSY. Handle them by checking for that value and filtering out EINPROGRESS notifications. The Linux kernel CVE team has assigned CVE-2026-43493 to this issue.(CVE-2026-43493) In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.(CVE-2026-43503) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().(CVE-2026-45834) In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <(CVE-2026-45861) In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]---(CVE-2026-45911) In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains.(CVE-2026-45943) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.(CVE-2026-45947) In the Linux kernel, the following vulnerability has been resolved: gfs2: fix memory leaks in gfs2_fill_super error path Fix two memory leaks in the gfs2_fill_super() error handling path when transitioning a filesystem to read-write mode fails. First leak: kthread objects (thread_struct, task_struct, etc.) When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the created kernel threads (logd and quotad) are never destroyed. This occurs because the fail_per_node label doesn't call gfs2_destroy_threads(). Second leak: quota bitmap buffer (8192 bytes) When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but before other operations complete, the allocated quota bitmap is never freed. The fix moves thread cleanup to the fail_per_node label to handle all error paths uniformly. gfs2_destroy_threads() is safe to call unconditionally as it checks for NULL pointers. Quota cleanup is added in gfs2_make_fs_rw() to properly handle the withdrawal case where quota initialization succeeds but the filesystem is then withdrawn. Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265 Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275(CVE-2026-45961) In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Cover a missed execution path with a new check.(CVE-2026-45982) In the Linux kernel, the following vulnerability has been resolved: erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap() Some crafted images can have illegal (!partial_decoding && m_llen < m_plen) extents, and the LZ4 inplace decompression path can be wrongly hit, but it cannot handle (outpages < inpages) properly: "outpages - inpages" wraps to a large value and the subsequent rq->out[] access reads past the decompressed_pages array. However, such crafted cases can correctly result in a corruption report in the normal LZ4 non-inplace path. Let's add an additional check to fix this for backporting. Reproducible image (base64-encoded gzipped blob): H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz 2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w ywAAAAAAAADwu14ATsEYtgBQAAA= $ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt $ dd if=/mnt/data of=/dev/null bs=4096 count=1(CVE-2026-45999) In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. The Linux kernel CVE team has assigned CVE-2026-46044 to this issue.(CVE-2026-46044) In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). The Linux kernel CVE team has assigned CVE-2026-46051 to this issue.(CVE-2026-46051) In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] The Linux kernel CVE team has assigned CVE-2026-46076 to this issue.(CVE-2026-46076) In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com The Linux kernel CVE team has assigned CVE-2026-46078 to this issue.(CVE-2026-46078) In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@] The Linux kernel CVE team has assigned CVE-2026-46082 to this issue.(CVE-2026-46082) In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users. The Linux kernel CVE team has assigned CVE-2026-46093 to this issue.(CVE-2026-46093) In the Linux kernel, the following vulnerability has been resolved:mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lockPatch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could racewith their writes, results in use-after-free. Fix those.This patch (of 2):damon_sysfs_scheme_filter->mmecg_path can be read and written by users,via DAMON sysfs memcg_path file. It can also be indirectly read, for theparameters {on,off}line committing to DAMON. The reads for parameterscommitting are protected by damon_sysfs_lock to avoid the sysfs filesbeing destroyed while any of the parameters are being read. But theuser-driven direct reads and writes are not protected by any lock, whilethe write is deallocating the memcg_path-pointing buffer. As a result,the readers could read the already freed buffer (user-after-free). Notethat the user-reads don't race when the same open file is used by thewriter, due to kernfs's open file locking. Nonetheless, doing the readsand writes with separate open files would be common. Fix it by protectingboth the user-direct reads and writes with damon_sysfs_lock.(CVE-2026-46121) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly.(CVE-2026-46138) In the Linux kernel, vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. The rtnl_delete_link() must happen under RTNL and cannot be executed in RCU context. Calling synchronize_net() while holding RTNL is not good for performance and system stability, so calling netdev_put() in RCU call is the right solution. However, when the device is deleted, rtnl_unlock() calls netdev_run_todo() and blocks until all references are gone. In the current code, this means that call_rcu() is never reached, the vport is never freed, and the reference is never released, causing a self-deadlock on device removal. The fix moves the rcu_call() before rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from rtnl_unlock()->netdev_run_todo() while RTNL itself is already released.(CVE-2026-46165) In the Linux kernel's RISC-V KVM subsystem, when the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is not freed, causing a memory leak. An attacker can trigger this via ioctl(vm_fd, KVM_CREATE_VCPU), potentially leading to resource exhaustion.(CVE-2026-46171) In the Linux kernel, the mlx4_ib_create_srq() function fails to release resources allocated by mlx4_srq_alloc() in error handling paths, leading to a resource leak. An attacker could exploit this vulnerability to cause resource exhaustion or denial of service.(CVE-2026-46178) In the Linux kernel, the spi_nor_params_show() function uses sizeof(snor_f_names) to calculate the array length. Since snor_f_names is an array of pointers, sizeof returns the total byte size of the pointer array (element_count sizeof(void )), which on 64-bit systems is 8 times larger than intended. This causes an out-of-bounds read when a flag bit is set that exceeds the actual element count but falls within the inflated byte-size count. The fix replaces sizeof with ARRAY_SIZE to pass the actual number of elements.(CVE-2026-46190) An update for kernel is now available for openEuler-24.03-LTS-SP3/openEuler-22.03-LTS-SP3/openEuler-24.03-LTS-SP2. openEuler Security has rated this update as having a security impact of critical. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. Critical kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39833 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-68334 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-68340 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-68801 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-71068 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-71087 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-71130 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-71152 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-71194 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23001 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23011 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23025 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23054 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23074 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23100 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23138 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23247 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23269 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23272 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23312 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23340 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23378 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23389 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23406 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23407 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23410 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23411 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23439 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23440 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23441 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23444 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23448 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23450 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23452 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23461 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23473 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-23475 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31392 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31398 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31399 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31400 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31403 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31408 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31421 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31422 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31426 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31429 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31430 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31441 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31442 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31446 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31449 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31450 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31451 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31452 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31467 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31469 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31487 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31495 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31496 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31498 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31499 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31505 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31510 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31511 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31512 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31516 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31518 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31525 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31528 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31531 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31532 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31533 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31540 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31542 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31546 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31555 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31566 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31570 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31590 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31595 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31628 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31630 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31651 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31665 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31667 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31675 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31677 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31678 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31684 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31685 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31689 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31697 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31698 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31699 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31708 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31738 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31752 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31755 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31771 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31773 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31779 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-31781 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43020 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43036 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43040 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43043 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43061 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43064 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43079 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43099 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43148 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43156 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43163 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43186 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43212 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43240 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43262 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43273 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43288 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43292 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43345 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43366 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43406 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43419 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43427 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43428 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43468 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43493 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-43503 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45834 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45861 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45911 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45943 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45947 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45961 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45982 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45999 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46044 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46051 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46076 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46078 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46082 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46093 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46121 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46138 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46165 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46171 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46178 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-46190 https://nvd.nist.gov/vuln/detail/CVE-2025-39833 https://nvd.nist.gov/vuln/detail/CVE-2025-68334 https://nvd.nist.gov/vuln/detail/CVE-2025-68340 https://nvd.nist.gov/vuln/detail/CVE-2025-68801 https://nvd.nist.gov/vuln/detail/CVE-2025-71068 https://nvd.nist.gov/vuln/detail/CVE-2025-71087 https://nvd.nist.gov/vuln/detail/CVE-2025-71130 https://nvd.nist.gov/vuln/detail/CVE-2025-71152 https://nvd.nist.gov/vuln/detail/CVE-2025-71194 https://nvd.nist.gov/vuln/detail/CVE-2026-23001 https://nvd.nist.gov/vuln/detail/CVE-2026-23011 https://nvd.nist.gov/vuln/detail/CVE-2026-23025 https://nvd.nist.gov/vuln/detail/CVE-2026-23054 https://nvd.nist.gov/vuln/detail/CVE-2026-23074 https://nvd.nist.gov/vuln/detail/CVE-2026-23100 https://nvd.nist.gov/vuln/detail/CVE-2026-23138 https://nvd.nist.gov/vuln/detail/CVE-2026-23247 https://nvd.nist.gov/vuln/detail/CVE-2026-23269 https://nvd.nist.gov/vuln/detail/CVE-2026-23272 https://nvd.nist.gov/vuln/detail/CVE-2026-23312 https://nvd.nist.gov/vuln/detail/CVE-2026-23340 https://nvd.nist.gov/vuln/detail/CVE-2026-23378 https://nvd.nist.gov/vuln/detail/CVE-2026-23389 https://nvd.nist.gov/vuln/detail/CVE-2026-23406 https://nvd.nist.gov/vuln/detail/CVE-2026-23407 https://nvd.nist.gov/vuln/detail/CVE-2026-23410 https://nvd.nist.gov/vuln/detail/CVE-2026-23411 https://nvd.nist.gov/vuln/detail/CVE-2026-23439 https://nvd.nist.gov/vuln/detail/CVE-2026-23440 https://nvd.nist.gov/vuln/detail/CVE-2026-23441 https://nvd.nist.gov/vuln/detail/CVE-2026-23444 https://nvd.nist.gov/vuln/detail/CVE-2026-23448 https://nvd.nist.gov/vuln/detail/CVE-2026-23450 https://nvd.nist.gov/vuln/detail/CVE-2026-23452 https://nvd.nist.gov/vuln/detail/CVE-2026-23461 https://nvd.nist.gov/vuln/detail/CVE-2026-23473 https://nvd.nist.gov/vuln/detail/CVE-2026-23475 https://nvd.nist.gov/vuln/detail/CVE-2026-31392 https://nvd.nist.gov/vuln/detail/CVE-2026-31398 https://nvd.nist.gov/vuln/detail/CVE-2026-31399 https://nvd.nist.gov/vuln/detail/CVE-2026-31400 https://nvd.nist.gov/vuln/detail/CVE-2026-31403 https://nvd.nist.gov/vuln/detail/CVE-2026-31408 https://nvd.nist.gov/vuln/detail/CVE-2026-31421 https://nvd.nist.gov/vuln/detail/CVE-2026-31422 https://nvd.nist.gov/vuln/detail/CVE-2026-31426 https://nvd.nist.gov/vuln/detail/CVE-2026-31429 https://nvd.nist.gov/vuln/detail/CVE-2026-31430 https://nvd.nist.gov/vuln/detail/CVE-2026-31441 https://nvd.nist.gov/vuln/detail/CVE-2026-31442 https://nvd.nist.gov/vuln/detail/CVE-2026-31446 https://nvd.nist.gov/vuln/detail/CVE-2026-31449 https://nvd.nist.gov/vuln/detail/CVE-2026-31450 https://nvd.nist.gov/vuln/detail/CVE-2026-31451 https://nvd.nist.gov/vuln/detail/CVE-2026-31452 https://nvd.nist.gov/vuln/detail/CVE-2026-31467 https://nvd.nist.gov/vuln/detail/CVE-2026-31469 https://nvd.nist.gov/vuln/detail/CVE-2026-31487 https://nvd.nist.gov/vuln/detail/CVE-2026-31495 https://nvd.nist.gov/vuln/detail/CVE-2026-31496 https://nvd.nist.gov/vuln/detail/CVE-2026-31498 https://nvd.nist.gov/vuln/detail/CVE-2026-31499 https://nvd.nist.gov/vuln/detail/CVE-2026-31505 https://nvd.nist.gov/vuln/detail/CVE-2026-31510 https://nvd.nist.gov/vuln/detail/CVE-2026-31511 https://nvd.nist.gov/vuln/detail/CVE-2026-31512 https://nvd.nist.gov/vuln/detail/CVE-2026-31516 https://nvd.nist.gov/vuln/detail/CVE-2026-31518 https://nvd.nist.gov/vuln/detail/CVE-2026-31525 https://nvd.nist.gov/vuln/detail/CVE-2026-31528 https://nvd.nist.gov/vuln/detail/CVE-2026-31531 https://nvd.nist.gov/vuln/detail/CVE-2026-31532 https://nvd.nist.gov/vuln/detail/CVE-2026-31533 https://nvd.nist.gov/vuln/detail/CVE-2026-31540 https://nvd.nist.gov/vuln/detail/CVE-2026-31542 https://nvd.nist.gov/vuln/detail/CVE-2026-31546 https://nvd.nist.gov/vuln/detail/CVE-2026-31555 https://nvd.nist.gov/vuln/detail/CVE-2026-31566 https://nvd.nist.gov/vuln/detail/CVE-2026-31570 https://nvd.nist.gov/vuln/detail/CVE-2026-31590 https://nvd.nist.gov/vuln/detail/CVE-2026-31595 https://nvd.nist.gov/vuln/detail/CVE-2026-31628 https://nvd.nist.gov/vuln/detail/CVE-2026-31630 https://nvd.nist.gov/vuln/detail/CVE-2026-31651 https://nvd.nist.gov/vuln/detail/CVE-2026-31665 https://nvd.nist.gov/vuln/detail/CVE-2026-31667 https://nvd.nist.gov/vuln/detail/CVE-2026-31675 https://nvd.nist.gov/vuln/detail/CVE-2026-31677 https://nvd.nist.gov/vuln/detail/CVE-2026-31678 https://nvd.nist.gov/vuln/detail/CVE-2026-31684 https://nvd.nist.gov/vuln/detail/CVE-2026-31685 https://nvd.nist.gov/vuln/detail/CVE-2026-31689 https://nvd.nist.gov/vuln/detail/CVE-2026-31697 https://nvd.nist.gov/vuln/detail/CVE-2026-31698 https://nvd.nist.gov/vuln/detail/CVE-2026-31699 https://nvd.nist.gov/vuln/detail/CVE-2026-31708 https://nvd.nist.gov/vuln/detail/CVE-2026-31738 https://nvd.nist.gov/vuln/detail/CVE-2026-31752 https://nvd.nist.gov/vuln/detail/CVE-2026-31755 https://nvd.nist.gov/vuln/detail/CVE-2026-31771 https://nvd.nist.gov/vuln/detail/CVE-2026-31773 https://nvd.nist.gov/vuln/detail/CVE-2026-31779 https://nvd.nist.gov/vuln/detail/CVE-2026-31781 https://nvd.nist.gov/vuln/detail/CVE-2026-43020 https://nvd.nist.gov/vuln/detail/CVE-2026-43036 https://nvd.nist.gov/vuln/detail/CVE-2026-43040 https://nvd.nist.gov/vuln/detail/CVE-2026-43043 https://nvd.nist.gov/vuln/detail/CVE-2026-43061 https://nvd.nist.gov/vuln/detail/CVE-2026-43064 https://nvd.nist.gov/vuln/detail/CVE-2026-43079 https://nvd.nist.gov/vuln/detail/CVE-2026-43099 https://nvd.nist.gov/vuln/detail/CVE-2026-43148 https://nvd.nist.gov/vuln/detail/CVE-2026-43156 https://nvd.nist.gov/vuln/detail/CVE-2026-43163 https://nvd.nist.gov/vuln/detail/CVE-2026-43186 https://nvd.nist.gov/vuln/detail/CVE-2026-43212 https://nvd.nist.gov/vuln/detail/CVE-2026-43240 https://nvd.nist.gov/vuln/detail/CVE-2026-43262 https://nvd.nist.gov/vuln/detail/CVE-2026-43273 https://nvd.nist.gov/vuln/detail/CVE-2026-43288 https://nvd.nist.gov/vuln/detail/CVE-2026-43292 https://nvd.nist.gov/vuln/detail/CVE-2026-43345 https://nvd.nist.gov/vuln/detail/CVE-2026-43366 https://nvd.nist.gov/vuln/detail/CVE-2026-43406 https://nvd.nist.gov/vuln/detail/CVE-2026-43419 https://nvd.nist.gov/vuln/detail/CVE-2026-43427 https://nvd.nist.gov/vuln/detail/CVE-2026-43428 https://nvd.nist.gov/vuln/detail/CVE-2026-43468 https://nvd.nist.gov/vuln/detail/CVE-2026-43493 https://nvd.nist.gov/vuln/detail/CVE-2026-43503 https://nvd.nist.gov/vuln/detail/CVE-2026-45834 https://nvd.nist.gov/vuln/detail/CVE-2026-45861 https://nvd.nist.gov/vuln/detail/CVE-2026-45911 https://nvd.nist.gov/vuln/detail/CVE-2026-45943 https://nvd.nist.gov/vuln/detail/CVE-2026-45947 https://nvd.nist.gov/vuln/detail/CVE-2026-45961 https://nvd.nist.gov/vuln/detail/CVE-2026-45982 https://nvd.nist.gov/vuln/detail/CVE-2026-45999 https://nvd.nist.gov/vuln/detail/CVE-2026-46044 https://nvd.nist.gov/vuln/detail/CVE-2026-46051 https://nvd.nist.gov/vuln/detail/CVE-2026-46076 https://nvd.nist.gov/vuln/detail/CVE-2026-46078 https://nvd.nist.gov/vuln/detail/CVE-2026-46082 https://nvd.nist.gov/vuln/detail/CVE-2026-46093 https://nvd.nist.gov/vuln/detail/CVE-2026-46121 https://nvd.nist.gov/vuln/detail/CVE-2026-46138 https://nvd.nist.gov/vuln/detail/CVE-2026-46165 https://nvd.nist.gov/vuln/detail/CVE-2026-46171 https://nvd.nist.gov/vuln/detail/CVE-2026-46178 https://nvd.nist.gov/vuln/detail/CVE-2026-46190 openEuler-24.03-LTS-SP3 bpftool-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm bpftool-debuginfo-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-debuginfo-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-debugsource-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-devel-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-extra-modules-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-headers-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-source-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-tools-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-tools-debuginfo-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm kernel-tools-devel-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm perf-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm perf-debuginfo-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm python3-perf-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm python3-perf-debuginfo-6.6.0-145.3.14.145.oe2403sp3.aarch64.rpm bpftool-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm bpftool-debuginfo-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-debuginfo-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-debugsource-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-devel-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-extra-modules-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-headers-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-source-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-tools-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-tools-debuginfo-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-tools-devel-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm perf-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm perf-debuginfo-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm python3-perf-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm python3-perf-debuginfo-6.6.0-145.3.14.145.oe2403sp3.x86_64.rpm kernel-6.6.0-145.3.14.145.oe2403sp3.src.rpm In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. 2026-06-05 CVE-2025-39833 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Add support for Van Gogh SoC The ROG Xbox Ally (non-X) SoC features a similar architecture to the Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash), this support was dropped by the Xbox Ally which only S0ix suspend. Since the handler is missing here, this causes the device to not suspend and the AMD GPU driver to crash while trying to resume afterwards due to a power hang. 2026-06-05 CVE-2025-68334 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: team: Move team device type change at the end of team_port_add Attempting to add a port device that is already up will expectedly fail, but not before modifying the team device header_ops. In the case of the syzbot reproducer the gre0 device is already in state UP when it attempts to add it as a port device of team0, this fails but before that header_ops->create of team0 is changed from eth_header to ipgre_header in the call to team_dev_type_check_change. Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense as the private data of the device still holds a struct team. Example sequence of iproute2 commands to reproduce the hang/BUG(): ip link add dev team0 type team ip link add dev gre0 type gre ip link set dev gre0 up ip link set dev gre0 master team0 ip link set dev team0 up ping -I team0 1.1.1.1 Move team_dev_type_check_change down where all other checks have passed as it changes the dev type with no way to restore it in case one of the checks that follow it fail. Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from dev This is done by adding a conditional before the call to dev_set_mtu to prevent it from assigning port_dev->mtu = dev->mtu and instead letting team_dev_type_check_change assign dev->mtu = port_dev->mtu. The conditional is needed because the patch moves the call to team_dev_type_check_change past dev_set_mtu. Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot 2026-06-05 CVE-2025-68340 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix neighbour use-after-free We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 2026-06-05 CVE-2025-68801 openEuler-24.03-LTS-SP3 Medium 6.7 AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: svcrdma: bound check rq_pages index in inline path svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without verifying rc_curpage stays within the allocated page array. Add guards before the first use and after advancing to a new page. 2026-06-05 CVE-2025-71068 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: iavf: fix off-by-one issues in iavf_config_rss_reg() There are off-by-one bugs when configuring RSS hash key and lookup table, causing out-of-bounds reads to memory [1] and out-of-bounds writes to device registers. Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"), the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX which is safe since the value is the last valid index. That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4 where `rss_{key,lut}_size / 4` is the number of dwords, so the last valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=` accesses one element past the end. Fix the issues by using `<` instead of `<=`, ensuring we do not exceed the bounds. [1] KASAN splat about rss_key_size off-by-one BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800 Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63 CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: iavf iavf_watchdog_task Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x1a0 iavf_config_rss+0x619/0x800 iavf_watchdog_task+0x2be7/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 63: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x246/0x6f0 iavf_watchdog_task+0x28fc/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff888102c50100 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes to the right of allocated 52-byte region [ffff888102c50100, ffff888102c50134) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50 flags: 0x200000000000000(node=0|zone=2) page_type: f5(slab) raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc >ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ^ ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc 2026-06-05 CVE-2025-71087 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer Initialize the eb.vma array with values of 0 when the eb structure is first set up. In particular, this sets the eb->vma[i].vma pointers to NULL, simplifying cleanup and getting rid of the bug described below. During the execution of eb_lookup_vmas(), the eb->vma array is successively filled up with struct eb_vma objects. This process includes calling eb_add_vma(), which might fail; however, even in the event of failure, eb->vma[i].vma is set for the currently processed buffer. If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which prompts a call to eb_release_vmas() to clean up the mess. Since eb_lookup_vmas() might fail during processing any (possibly not first) buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know at what point did the lookup function fail. In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is set to NULL in case i915_gem_object_userptr_submit_init() fails; the current one needs to be cleaned up by eb_release_vmas() at this point, so the next one is set. If eb_add_vma() fails, neither the current nor the next vma is set to NULL, which is a source of a NULL deref bug described in the issue linked in the Closes tag. When entering eb_lookup_vmas(), the vma pointers are set to the slab poison value, instead of NULL. This doesn't matter for the actual lookup, since it gets overwritten anyway, however the eb_release_vmas() function only recognizes NULL as the stopping value, hence the pointers are being set to NULL as they go in case of intermediate failure. This patch changes the approach to filling them all with NULL at the start instead, rather than handling that manually during failure. (cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd) 2026-06-05 CVE-2025-71130 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: dsa: properly keep track of conduit reference Problem description ------------------- DSA has a mumbo-jumbo of reference handling of the conduit net device and its kobject which, sadly, is just wrong and doesn't make sense. There are two distinct problems. 1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch: (unbind the conduit driver for net device eno2) echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind we see these lines in the output diff which appear only with the patch applied: kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000) kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000) 2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()). Actually we actually use that netdev tracker mechanism implicitly on user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link(). But time still passes at DSA switch probe time between the initial of_find_net_device_by_node() code and the user port creation time, time during which the conduit could unregister itself and DSA wouldn't know about it. So we have to run of_find_net_device_by_node() under rtnl_lock() to prevent that from happening, and release the lock only with the netdev tracker having acquired the reference. Do we need to keep the reference until dsa_unregister_switch() / dsa_switch_shutdown()? 1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference. 2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed. As for the conduit's kobject for the /sys/class/net/ entry, we don't care about it, we can release it as soon as we hold the net device object itself. History and blame attribution ----------------------------- The code has been refactored so many times, it is very difficult to follow and properly attribute a blame, but I'll try to make a short history which I hope to be correct. We have two distinct probing paths: - one for OF, introduced in 2016 i ---truncated--- 2026-06-05 CVE-2025-71152 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock in wait_current_trans() due to ignored transaction type When wait_current_trans() is called during start_transaction(), it currently waits for a blocked transaction without considering whether the given transaction type actually needs to wait for that particular transaction state. The btrfs_blocked_trans_types[] array already defines which transaction types should wait for which transaction states, but this check was missing in wait_current_trans(). This can lead to a deadlock scenario involving two transactions and pending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction B This can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!) Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered extents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30 Fix this by passing the transaction type to wait_current_trans() and checking btrfs_blocked_trans_types[cur_trans->state] against the given type before deciding to wait. This ensures that transaction types which are allowed to join during certain blocked states will not unnecessarily wait and cause deadlocks. 2026-06-05 CVE-2025-71194 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/ 2026-06-05 CVE-2026-23001 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_gre: make ipgre_header() robust Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 2026-06-05 CVE-2026-23011 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: prevent pcp corruption with SMP=n The kernel test robot has reported: BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28 lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0 CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470 Call Trace: <IRQ> __dump_stack (lib/dump_stack.c:95) dump_stack_lvl (lib/dump_stack.c:123) dump_stack (lib/dump_stack.c:130) spin_dump (kernel/locking/spinlock_debug.c:71) do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?) _raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138) __free_frozen_pages (mm/page_alloc.c:2973) ___free_pages (mm/page_alloc.c:5295) __free_pages (mm/page_alloc.c:5334) tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290) ? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289) ? rcu_core (kernel/rcu/tree.c:?) rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861) rcu_core_si (kernel/rcu/tree.c:2879) handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623) __irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725) irq_exit_rcu (kernel/softirq.c:741) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052) </IRQ> <TASK> RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194) free_pcppages_bulk (mm/page_alloc.c:1494) drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632) __drain_all_pages (mm/page_alloc.c:2731) drain_all_pages (mm/page_alloc.c:2747) kcompactd (mm/compaction.c:3115) kthread (kernel/kthread.c:465) ? __cfi_kcompactd (mm/compaction.c:3166) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork (arch/x86/kernel/process.c:164) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) </TASK> Matthew has analyzed the report and identified that in drain_page_zone() we are in a section protected by spin_lock(&pcp->lock) and then get an interrupt that attempts spin_trylock() on the same lock. The code is designed to work this way without disabling IRQs and occasionally fail the trylock with a fallback. However, the SMP=n spinlock implementation assumes spin_trylock() will always succeed, and thus it's normally a no-op. Here the enabled lock debugging catches the problem, but otherwise it could cause a corruption of the pcp structure. The problem has been introduced by commit 574907741599 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme recognizes the need for disabling IRQs to prevent nesting spin_trylock() sections on SMP=n, but the need to prevent the nesting in spin_lock() has not been recognized. Fix it by introducing local wrappers that change the spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places that do spin_lock(&pcp->lock). [ 2026-06-05 CVE-2026-23025 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: hv_netvsc: reject RSS hash key programming without RX indirection table RSS configuration requires a valid RX indirection table. When the device reports a single receive queue, rndis_filter_device_add() does not allocate an indirection table, accepting RSS hash key updates in this state leads to a hang. Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return -EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device capabilities and prevents incorrect behavior. 2026-06-05 CVE-2026-23054 openEuler-24.03-LTS-SP3 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim < 2026-06-05 CVE-2026-23074 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared(). 2026-06-05 CVE-2026-23100 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: tracing: Add recursion protection in kernel stack trace recording A bug was reported about an infinite recursion caused by tracing the rcu events with the kernel stack trace trigger enabled. The stack trace code called back into RCU which then called the stack trace again. Expand the ftrace recursion protection to add a set of bits to protect events from recursion. Each bit represents the context that the event is in (normal, softirq, interrupt and NMI). Have the stack trace code use the interrupt context to protect against recursion. Note, the bug showed an issue in both the RCU code as well as the tracing stacktrace code. This only handles the tracing stack trace side of the bug. The RCU fix will be handled separately. 2026-06-05 CVE-2026-23138 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: tcp: secure_seq: add back ports to TS offset This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets") tcp_tw_recycle went away in 2017. Zhouyan Deng reported off-path TCP source port leakage via SYN cookie side-channel that can be fixed in multiple ways. One of them is to bring back TCP ports in TS offset randomization. As a bonus, we perform a single siphash() computation to provide both an ISN and a TS offset. 2026-06-05 CVE-2026-23247 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, a vulnerability exists in the AppArmor module's unpack_pdb function. The vulnerability occurs due to failure to validate that DFA start states are within bounds, which can lead to out-of-bound reads. An attacker can exploit this vulnerability through specially crafted policy files, potentially leading to information disclosure or system crashes. 2026-06-05 CVE-2026-23269 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches. 2026-06-05 CVE-2026-23272 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: validate USB endpoints The kaweth driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints. 2026-06-05 CVE-2026-23312 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. 2026-06-05 CVE-2026-23340 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure. 2026-06-05 CVE-2026-23378 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ice: Fix memory leak in ice_set_ringparam() In ice_set_ringparam, tx_rings and xdp_rings are allocated before rx_rings. If the allocation of rx_rings fails, the code jumps to the done label leaking both tx_rings and xdp_rings. Furthermore, if the setup of an individual Rx ring fails during the loop, the code jumps to the free_tx label which releases tx_rings but leaks xdp_rings. Fix this by introducing a free_xdp label and updating the error paths to ensure both xdp_rings and tx_rings are properly freed if rx_rings allocation or setup fails. Compile tested only. Issue found using a prototype static analysis tool and code review. 2026-06-05 CVE-2026-23389 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: apparmor: fix side-effect bug in match_char() macro usage The match_char() macro evaluates its character parameter multiple times when traversing differential encoding chains. When invoked with *str++, the string pointer advances on each iteration of the inner do-while loop, causing the DFA to check different characters at each iteration and therefore skip input characters. This results in out-of-bounds reads when the pointer advances past the input buffer boundary. [ 94.984676] ================================================================== [ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760 [ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976 [ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 94.986329] Call Trace: [ 94.986341] <TASK> [ 94.986347] dump_stack_lvl+0x5e/0x80 [ 94.986374] print_report+0xc8/0x270 [ 94.986384] ? aa_dfa_match+0x5ae/0x760 [ 94.986388] kasan_report+0x118/0x150 [ 94.986401] ? aa_dfa_match+0x5ae/0x760 [ 94.986405] aa_dfa_match+0x5ae/0x760 [ 94.986408] __aa_path_perm+0x131/0x400 [ 94.986418] aa_path_perm+0x219/0x2f0 [ 94.986424] apparmor_file_open+0x345/0x570 [ 94.986431] security_file_open+0x5c/0x140 [ 94.986442] do_dentry_open+0x2f6/0x1120 [ 94.986450] vfs_open+0x38/0x2b0 [ 94.986453] ? may_open+0x1e2/0x2b0 [ 94.986466] path_openat+0x231b/0x2b30 [ 94.986469] ? __x64_sys_openat+0xf8/0x130 [ 94.986477] do_file_open+0x19d/0x360 [ 94.986487] do_sys_openat2+0x98/0x100 [ 94.986491] __x64_sys_openat+0xf8/0x130 [ 94.986499] do_syscall_64+0x8e/0x660 [ 94.986515] ? count_memcg_events+0x15f/0x3c0 [ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986540] ? handle_mm_fault+0x1639/0x1ef0 [ 94.986551] ? vma_start_read+0xf0/0x320 [ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0 [ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0 [ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986588] ? irqentry_exit+0x3c/0x590 [ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 94.986597] RIP: 0033:0x7fda4a79c3ea Fix by extracting the character value before invoking match_char, ensuring single evaluation per outer loop. 2026-06-05 CVE-2026-23406 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: apparmor: fix missing bounds check on DEFAULT table in verify_dfa() The verify_dfa() function only checks DEFAULT_TABLE bounds when the state is not differentially encoded. When the verification loop traverses the differential encoding chain, it reads k = DEFAULT_TABLE[j] and uses k as an array index without validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count, therefore, causes both out-of-bounds reads and writes. [ 57.179855] ================================================================== [ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660 [ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993 [ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 57.181563] Call Trace: [ 57.181572] <TASK> [ 57.181577] dump_stack_lvl+0x5e/0x80 [ 57.181596] print_report+0xc8/0x270 [ 57.181605] ? verify_dfa+0x59a/0x660 [ 57.181608] kasan_report+0x118/0x150 [ 57.181620] ? verify_dfa+0x59a/0x660 [ 57.181623] verify_dfa+0x59a/0x660 [ 57.181627] aa_dfa_unpack+0x1610/0x1740 [ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470 [ 57.181640] unpack_pdb+0x86d/0x46b0 [ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181656] ? aa_unpack_nameX+0x1a8/0x300 [ 57.181659] aa_unpack+0x20b0/0x4c30 [ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181664] ? stack_depot_save_flags+0x33/0x700 [ 57.181681] ? kasan_save_track+0x4f/0x80 [ 57.181683] ? kasan_save_track+0x3e/0x80 [ 57.181686] ? __kasan_kmalloc+0x93/0xb0 [ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130 [ 57.181697] ? policy_update+0x154/0x330 [ 57.181704] aa_replace_profiles+0x15a/0x1dd0 [ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181712] ? aa_loaddata_alloc+0x77/0x140 [ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181717] ? _copy_from_user+0x2a/0x70 [ 57.181730] policy_update+0x17a/0x330 [ 57.181733] profile_replace+0x153/0x1a0 [ 57.181735] ? rw_verify_area+0x93/0x2d0 [ 57.181740] vfs_write+0x235/0xab0 [ 57.181745] ksys_write+0xb0/0x170 [ 57.181748] do_syscall_64+0x8e/0x660 [ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 57.181765] RIP: 0033:0x7f6192792eb2 Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE entries unconditionally. 2026-06-05 CVE-2026-23407 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 A race condition vulnerability exists in the AppArmor security module of the Linux kernel, leading to a use-after-free issue. This vulnerability can be triggered when an attacker simultaneously opens rawdata files and removes an associated AppArmor profile. Since rawdata inodes are not refcounted, there is a time window during profile removal where the i_private pointer may reference freed memory, causing the system to access freed memory regions. This can result in program crashes, unexpected value usage, or arbitrary code execution, threatening the confidentiality, integrity, and availability of the system. 2026-06-05 CVE-2026-23410 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 A vulnerability exists in the AppArmor security module of the Linux kernel when handling the i_private field of the inode structure. AppArmor was putting the reference to i_private data on its end after removing the original entry from the file system. However the inode can and does live beyond that point and it is possible that some of the fs callback functions will be invoked after the reference has been put, which results in a race between freeing the data and accessing it through the fs. While the rawdata/loaddata is the most likely candidate to fail the race, as it has the fewest references. If properly crafted it might be possible to trigger a race for the other types stored in i_private. This vulnerability could allow a local attacker to bypass AppArmor's access control policies through a specially crafted request, leading to privilege escalation and impacting system confidentiality, integrity, and availability. 2026-06-05 CVE-2026-23411 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0 (success) without actually creating a socket. Callers such as fou_create() then proceed to dereference the uninitialized socket pointer, resulting in a NULL pointer dereference. The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: <TASK> genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130) This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so callers correctly take their error paths. There is only one caller of the vulnerable function and only privileged users can trigger it. 2026-06-05 CVE-2026-23439 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race condition during IPSec ESN update In IPSec full offload mode, the device reports an ESN (Extended Sequence Number) wrap event to the driver. The driver validates this event by querying the IPSec ASO and checking that the esn_event_arm field is 0x0, which indicates an event has occurred. After handling the event, the driver must re-arm the context by setting esn_event_arm back to 0x1. A race condition exists in this handling path. After validating the event, the driver calls mlx5_accel_esp_modify_xfrm() to update the kernel's xfrm state. This function temporarily releases and re-acquires the xfrm state lock. So, need to acknowledge the event first by setting esn_event_arm to 0x1. This prevents the driver from reprocessing the same ESN update if the hardware sends events for other reason. Since the next ESN update only occurs after nearly 2^31 packets are received, there's no risk of missing an update, as it will happen long after this handling has finished. Processing the event twice causes the ESN high-order bits (esn_msb) to be incremented incorrectly. The driver then programs the hardware with this invalid ESN state, which leads to anti-replay failures and a complete halt of IPSec traffic. Fix this by re-arming the ESN event immediately after it is validated, before calling mlx5_accel_esp_modify_xfrm(). This ensures that any spurious, duplicate events are correctly ignored, closing the race window. 2026-06-05 CVE-2026-23440 openEuler-24.03-LTS-SP3 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent concurrent access to IPSec ASO context The query or updating IPSec offload object is through Access ASO WQE. The driver uses a single mlx5e_ipsec_aso struct for each PF, which contains a shared DMA-mapped context for all ASO operations. A race condition exists because the ASO spinlock is released before the hardware has finished processing WQE. If a second operation is initiated immediately after, it overwrites the shared context in the DMA area. When the first operation's completion is processed later, it reads this corrupted context, leading to unexpected behavior and incorrect results. This commit fixes the race by introducing a private context within each IPSec offload object. The shared ASO context is now copied to this private context while the ASO spinlock is held. Subsequent processing uses this saved, per-object context, ensuring its integrity is maintained. 2026-06-05 CVE-2026-23441 openEuler-24.03-LTS-SP3 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure ieee80211_tx_prepare_skb() has three error paths, but only two of them free the skb. The first error path (ieee80211_tx_prepare() returning TX_DROP) does not free it, while invoke_tx_handlers() failure and the fragmentation check both do. Add kfree_skb() to the first error path so all three are consistent, and remove the now-redundant frees in callers (ath9k, mt76, mac80211_hwsim) to avoid double-free. Document the skb ownership guarantee in the function's kdoc. 2026-06-05 CVE-2026-23444 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. 2026-06-05 CVE-2026-23448 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock() Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1]. smc_tcp_syn_recv_sock() is called in the TCP receive path (softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP listening socket). It reads sk_user_data to get the smc_sock pointer. However, when the SMC listen socket is being closed concurrently, smc_close_active() sets clcsock->sk_user_data to NULL under sk_callback_lock, and then the smc_sock itself can be freed via sock_put() in smc_release(). This leads to two issues: 1) NULL pointer dereference: sk_user_data is NULL when accessed. 2) Use-after-free: sk_user_data is read as non-NULL, but the smc_sock is freed before its fields (e.g., queued_smc_hs, ori_af_ops) are accessed. The race window looks like this (the syzkaller crash [1] triggers via the SYN cookie path: tcp_get_cookie_sock() -> smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path has the same race): CPU A (softirq) CPU B (process ctx) tcp_v4_rcv() TCP_NEW_SYN_RECV: sk = req->rsk_listener sock_hold(sk) /* No lock on listener */ smc_close_active(): write_lock_bh(cb_lock) sk_user_data = NULL write_unlock_bh(cb_lock) ... smc_clcsock_release() sock_put(smc->sk) x2 -> smc_sock freed! tcp_check_req() smc_tcp_syn_recv_sock(): smc = user_data(sk) -> NULL or dangling smc->queued_smc_hs -> crash! Note that the clcsock and smc_sock are two independent objects with separate refcounts. TCP stack holds a reference on the clcsock, which keeps it alive, but this does NOT prevent the smc_sock from being freed. Fix this by using RCU and refcount_inc_not_zero() to safely access smc_sock. Since smc_tcp_syn_recv_sock() is called in the TCP three-way handshake path, taking read_lock_bh on sk_callback_lock is too heavy and would not survive a SYN flood attack. Using rcu_read_lock() is much more lightweight. - Set SOCK_RCU_FREE on the SMC listen socket so that smc_sock freeing is deferred until after the RCU grace period. This guarantees the memory is still valid when accessed inside rcu_read_lock(). - Use rcu_read_lock() to protect reading sk_user_data. - Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the smc_sock. If the refcount has already reached zero (close path completed), it returns false and we bail out safely. Note: smc_hs_congested() has a similar lockless read of sk_user_data without rcu_read_lock(), but it only checks for NULL and accesses the global smc_hs_wq, never dereferencing any smc_sock field, so it is not affected. Reproducer was verified with mdelay injection and smc_run, the issue no longer occurs with this patch applied. [1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9 2026-06-05 CVE-2026-23450 openEuler-24.03-LTS-SP3 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: PM: runtime: Fix a race condition related to device removal The following code in pm_runtime_work() may dereference the dev->parent pointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); } Fix this by inserting a flush_work() call in pm_runtime_remove(). Without this patch blktest block/001 triggers the following complaint sporadically: BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160 Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081 Workqueue: pm pm_runtime_work Call Trace: <TASK> dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 2026-06-05 CVE-2026-23452 openEuler-24.03-LTS-SP3 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to conn->users. However, l2cap_register_user() and l2cap_unregister_user() don't use conn->lock, creating a race condition where these functions can access conn->users and conn->hchan concurrently with l2cap_conn_del(). This can lead to use-after-free and list corruption bugs, as reported by syzbot. Fix this by changing l2cap_register_user() and l2cap_unregister_user() to use conn->lock instead of hci_dev_lock(), ensuring consistent locking for the l2cap_conn structure. 2026-06-05 CVE-2026-23461 openEuler-24.03-LTS-SP3 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. 2026-06-05 CVE-2026-23473 openEuler-24.03-LTS-SP3 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: spi: fix statistics allocation The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres). 2026-06-05 CVE-2026-23475 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix krb5 mount with username option Customer reported that some of their krb5 mounts were failing against a single server as the client was trying to mount the shares with wrong credentials. It turned out the client was reusing SMB session from first mount to try mounting the other shares, even though a different username= option had been specified to the other mounts. By using username mount option along with sec=krb5 to search for principals from keytab is supported by cifs.upcall(8) since cifs-utils-4.8. So fix this by matching username mount option in match_session() even with Kerberos. For example, the second mount below should fail with -ENOKEY as there is no 'foobar' principal in keytab (/etc/krb5.keytab). The client ends up reusing SMB session from first mount to perform the second one, which is wrong. ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for 2026-06-05 CVE-2026-31392 openEuler-24.03-LTS-SP3 High 8.1 AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:L kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix incorrect pte restoration for lazyfree folios We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the batch has a mix of writable and non-writable bits, we may end up setting the entire batch writable. Fix this by respecting writable bit during batching. Although on a successful unmap of a lazyfree folio, the soft-dirty bit is lost, preserve it on pte restoration by respecting the bit during batching, to make the fix consistent w.r.t both writable bit and soft-dirty bit. I was able to write the below reproducer and crash the kernel. Explanation of reproducer (set 64K mTHP to always): Fault in a 64K large folio. Split the VMA at mid-point with MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do MADV_FREE on the range to mark the folio as lazyfree. Write to the memory to dirty the pte, eventually rmap will dirty the folio. Then trigger reclaim, we will hit the pte restoration path, and the kernel will crash with the trace given below. The BUG happens at: BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw); The code path is asking for anonymous page to be mapped writable into the pagetable. The BUG_ON() firing implies that such a writable page has been mapped into the pagetables of more than one process, which breaks anonymous memory/CoW semantics. [ 21.134473] kernel BUG at mm/page_table_check.c:118! [ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 21.135917] Modules linked in: [ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT [ 21.136858] Hardware name: linux,dummy-virt (DT) [ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 21.137308] pc : page_table_check_set+0x28c/0x2a8 [ 21.137607] lr : page_table_check_set+0x134/0x2a8 [ 21.137885] sp : ffff80008a3b3340 [ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000 [ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001 [ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30 [ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000 [ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff [ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020 [ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0 [ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff [ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002 [ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0 [ 21.141991] Call trace: [ 21.142093] page_table_check_set+0x28c/0x2a8 (P) [ 21.142265] __page_table_check_ptes_set+0x144/0x1e8 [ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8 [ 21.142766] contpte_set_ptes+0xe8/0x140 [ 21.142907] try_to_unmap_one+0x10c4/0x10d0 [ 21.143177] rmap_walk_anon+0x100/0x250 [ 21.143315] try_to_unmap+0xa0/0xc8 [ 21.143441] shrink_folio_list+0x59c/0x18a8 [ 21.143759] shrink_lruvec+0x664/0xbf0 [ 21.144043] shrink_node+0x218/0x878 [ 21.144285] __node_reclaim.constprop.0+0x98/0x338 [ 21.144763] user_proactive_reclaim+0x2a4/0x340 [ 21.145056] reclaim_store+0x3c/0x60 [ 21.145216] dev_attr_store+0x20/0x40 [ 21.145585] sysfs_kf_write+0x84/0xa8 [ 21.145835] kernfs_fop_write_iter+0x130/0x1c8 [ 21.145994] vfs_write+0x2b8/0x368 [ 21.146119] ksys_write+0x70/0x110 [ 21.146240] __arm64_sys_write+0x24/0x38 [ 21.146380] invoke_syscall+0x50/0x120 [ 21.146513] el0_svc_common.constprop.0+0x48/0xf8 [ 21.146679] do_el0_svc+0x28/0x40 [ 21.146798] el0_svc+0x34/0x110 [ 21.146926] el0t ---truncated--- 2026-06-05 CVE-2026-31398 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: nvdimm/bus: Fix potential use after free in asynchronous initialization Dingisoul with KASAN reports a use after free if device_add() fails in nd_async_device_register(). Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init") correctly added a reference on the parent device to be held until asynchronous initialization was complete. However, if device_add() results in an allocation failure the ref count of the device drops to 0 prior to the parent pointer being accessed. Thus resulting in use after free. The bug bot AI correctly identified the fix. Save a reference to the parent pointer to be used to drop the parent reference regardless of the outcome of device_add(). 2026-06-05 CVE-2026-31399 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix cache_request leak in cache_release When a reader's file descriptor is closed while in the middle of reading a cache_request (rp->offset != 0), cache_release() decrements the request's readers count but never checks whether it should free the request. In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the cache_request is removed from the queue and freed along with its buffer and cache_head reference. cache_release() lacks this cleanup. The only other path that frees requests with readers == 0 is cache_dequeue(), but it runs only when CACHE_PENDING transitions from set to clear. If that transition already happened while readers was still non-zero, cache_dequeue() will have skipped the request, and no subsequent call will clean it up. Add the same cleanup logic from cache_read() to cache_release(): after decrementing readers, check if it reached 0 with CACHE_PENDING clear, and if so, dequeue and free the cache_request. 2026-06-05 CVE-2026-31400 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage. 2026-06-05 CVE-2026-31403 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the Bluetooth SCO module's sco_recv_frame() function contains a use-after-free vulnerability. The function reads conn->sk under sco_conn_lock() but immediately releases the lock without holding a reference to the socket. A concurrent close() operation can free the socket between the lock release and the subsequent sk->sk_state access, resulting in a use-after-free vulnerability. Other functions in the same file (sco_sock_timeout(), sco_conn_del()) correctly use sco_sock_hold() to safely hold references under the lock. The vulnerability is fixed by using sco_sock_hold() to acquire a reference before releasing the lock and adding sock_put() on all exit paths. 2026-06-05 CVE-2026-31408 openEuler-24.03-LTS-SP3 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) 2026-06-05 CVE-2026-31421 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] ======================================================================= 2026-06-05 CVE-2026-31422 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC 2026-06-05 CVE-2026-31426 openEuler-24.03-LTS-SP3 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: skb: fix cross-cache free of KFENCE-allocated skb head SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2 value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc bucket sizes. This ensures that skb_kfree_head() can reliably use skb_end_offset to distinguish skb heads allocated from skb_small_head_cache vs. generic kmalloc caches. However, when KFENCE is enabled, kfence_ksize() returns the exact requested allocation size instead of the slab bucket size. If a caller (e.g. bpf_test_init) allocates skb head data via kzalloc() and the requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then slab_build_skb() -> ksize() returns that exact value. After subtracting skb_shared_info overhead, skb_end_offset ends up matching SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free the object to skb_small_head_cache instead of back to the original kmalloc cache, resulting in a slab cross-cache free: kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected skbuff_small_head but got kmalloc-1k Fix this by always calling kfree(head) in skb_kfree_head(). This keeps the free path generic and avoids allocator-specific misclassification for KFENCE objects. 2026-06-05 CVE-2026-31429 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: X.509: Fix out-of-bounds access when parsing extensions Leo reports an out-of-bounds access when parsing a certificate with empty Basic Constraints or Key Usage extension because the first byte of the extension is read before checking its length. Fix it. The bug can be triggered by an unprivileged user by submitting a specially crafted certificate to the kernel through the keyrings(7) API. Leo has demonstrated this with a proof-of-concept program responsibly disclosed off-list. 2026-06-05 CVE-2026-31430 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix memory leak when a wq is reset idxd_wq_disable_cleanup() which is called from the reset path for a workqueue, sets the wq type to NONE, which for other parts of the driver mean that the wq is empty (all its resources were released). Only set the wq type to NONE after its resources are released. 2026-06-05 CVE-2026-31441 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes. 2026-06-05 CVE-2026-31442 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. 2026-06-05 CVE-2026-31446 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code. 2026-06-05 CVE-2026-31449 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer. 2026-06-05 CVE-2026-31450 openEuler-24.03-LTS-SP3 High 8.8 AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. 2026-06-05 CVE-2026-31451 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. 2026-06-05 CVE-2026-31452 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path. 2026-06-05 CVE-2026-31467 openEuler-24.03-LTS-SP3 High 7.5 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns 2026-06-05 CVE-2026-31469 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". 2026-06-05 CVE-2026-31487 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree. 2026-06-05 CVE-2026-31495 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc"). 2026-06-05 CVE-2026-31496 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ertm_init() and l2cap_chan_ready() when the channel is already in BT_CONNECTED state, while still allowing the reconfiguration parameters to be updated through l2cap_parse_conf_req(). Also add a pdu_len zero check in l2cap_segment_sdu() as a safeguard. 2026-06-05 CVE-2026-31498 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del(). 2026-06-05 CVE-2026-31499 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 2026-06-05 CVE-2026-31505 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb Before using sk pointer, check if it is null. Fix the following: KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267] CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025 Workqueue: events l2cap_info_timeout RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce veth0_macvtap: entered promiscuous mode RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0 PKRU: 55555554 Call Trace: <TASK> __kasan_check_byte+0x12/0x40 lock_acquire+0x79/0x2e0 lock_sock_nested+0x48/0x100 ? l2cap_sock_ready_cb+0x46/0x160 l2cap_sock_ready_cb+0x46/0x160 l2cap_conn_start+0x779/0xff0 ? __pfx_l2cap_conn_start+0x10/0x10 ? l2cap_info_timeout+0x60/0xa0 ? __pfx___mutex_lock+0x10/0x10 l2cap_info_timeout+0x68/0xa0 ? process_scheduled_works+0xa8d/0x18c0 process_scheduled_works+0xb6e/0x18c0 ? __pfx_process_scheduled_works+0x10/0x10 ? assign_work+0x3d5/0x5e0 worker_thread+0xa53/0xfc0 kthread+0x388/0x470 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x51e/0xb90 ? __pfx_ret_from_fork+0x10/0x10 veth1_macvtap: entered promiscuous mode ? __switch_to+0xc7d/0x1450 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- batman_adv: batadv0: Interface activated: batadv_slave_0 batman_adv: batadv0: Interface activated: batadv_slave_1 netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception 2026-06-05 CVE-2026-31510 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory. 2026-06-05 CVE-2026-31511 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv() l2cap_ecred_data_rcv() reads the SDU length field from skb->data using get_unaligned_le16() without first verifying that skb contains at least L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads past the valid data in the skb. The ERTM reassembly path correctly calls pskb_may_pull() before reading the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the same validation to the Enhanced Credit Based Flow Control data path. 2026-06-05 CVE-2026-31512 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net. 2026-06-05 CVE-2026-31516 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error. 2026-06-05 CVE-2026-31518 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs(). 2026-06-05 CVE-2026-31525 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: perf: Make sure to use pmu_ctx->pmu for groups Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access when group_sched_in() fails and needs to roll back. This *should* be handled by the transaction callbacks, but he found that when the group leader is a software event, the transaction handlers of the wrong PMU are used. Despite the move_group case in perf_event_open() and group_sched_in() using pmu_ctx->pmu. Turns out, inherit uses event->pmu to clone the events, effectively undoing the move_group case for all inherited contexts. Fix this by also making inherit use pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context. Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the group case. 2026-06-05 CVE-2026-31528 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048 2026-06-05 CVE-2026-31531 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: can: raw: fix ro->uniq use-after-free in raw_rcv() raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. [mkl: applied manually] 2026-06-05 CVE-2026-31532 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption The -EBUSY handling in tls_do_encryption(), introduced by commit 859054147318 ("net: tls: handle backlogging of crypto requests"), has a use-after-free due to double cleanup of encrypt_pending and the scatterlist entry. When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to the cryptd backlog and the async callback tls_encrypt_done() will be invoked upon completion. That callback unconditionally restores the scatterlist entry (sge->offset, sge->length) and decrements ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an error, the synchronous error path in tls_do_encryption() performs the same cleanup again, double-decrementing encrypt_pending and double-restoring the scatterlist. The double-decrement corrupts the encrypt_pending sentinel (initialized to 1), making tls_encrypt_async_wait() permanently skip the wait for pending async callbacks. A subsequent sendmsg can then free the tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still pending, resulting in a use-after-free when the callback fires on the freed record. Fix this by skipping the synchronous cleanup when the -EBUSY async wait returns an error, since the callback has already handled encrypt_pending and sge restoration. 2026-06-05 CVE-2026-31533 openEuler-24.03-LTS-SP3 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Check set_default_submission() before deferencing When the i915 driver firmware binaries are not present, the set_default_submission pointer is not set. This pointer is dereferenced during suspend anyways. Add a check to make sure it is set before dereferencing. [ 23.289926] PM: suspend entry (deep) [ 23.293558] Filesystems sync: 0.000 seconds [ 23.298010] Freezing user space processes [ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds) [ 23.309766] OOM killer disabled. [ 23.313027] Freezing remaining freezable tasks [ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 23.342038] serial 00:05: disabled [ 23.345719] serial 00:02: disabled [ 23.349342] serial 00:01: disabled [ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 23.361635] ata1.00: Entering standby power mode [ 23.368863] ata2.00: Entering standby power mode [ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 23.452194] #PF: supervisor instruction fetch in kernel mode [ 23.457896] #PF: error_code(0x0010) - not-present page [ 23.463065] PGD 0 P4D 0 [ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI [ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary) [ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 23.496511] Workqueue: async async_run_entry_fn [ 23.501087] RIP: 0010:0x0 [ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246 [ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f [ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000 [ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff [ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8 [ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68 [ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000 [ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0 [ 23.572539] PKRU: 55555554 [ 23.575281] Call Trace: [ 23.577770] <TASK> [ 23.579905] intel_engines_reset_default_submission+0x42/0x60 [ 23.585695] __intel_gt_unset_wedged+0x191/0x200 [ 23.590360] intel_gt_unset_wedged+0x20/0x40 [ 23.594675] gt_sanitize+0x15e/0x170 [ 23.598290] i915_gem_suspend_late+0x6b/0x180 [ 23.602692] i915_drm_suspend_late+0x35/0xf0 [ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10 [ 23.611843] dpm_run_callback+0x78/0x1c0 [ 23.615817] device_suspend_late+0xde/0x2e0 [ 23.620037] async_suspend_late+0x18/0x30 [ 23.624082] async_run_entry_fn+0x25/0xa0 [ 23.628129] process_one_work+0x15b/0x380 [ 23.632182] worker_thread+0x2a5/0x3c0 [ 23.635973] ? __pfx_worker_thread+0x10/0x10 [ 23.640279] kthread+0xf6/0x1f0 [ 23.643464] ? __pfx_kthread+0x10/0x10 [ 23.647263] ? __pfx_kthread+0x10/0x10 [ 23.651045] ret_from_fork+0x131/0x190 [ 23.654837] ? __pfx_kthread+0x10/0x10 [ 23.658634] ret_from_fork_asm+0x1a/0x30 [ 23.662597] </TASK> [ 23.664826] Modules linked in: [ 23.667914] CR2: 0000000000000000 [ 23.671271] ------------[ cut here ]------------ (cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) 2026-06-05 CVE-2026-31540 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: x86/platform/uv: Handle deconfigured sockets When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes a panic while allocating UV hub info structures. Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be allocated on valid nodes. 2026-06-05 CVE-2026-31542 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave. 2026-06-05 CVE-2026-31546 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi. 2026-06-05 CVE-2026-31555 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence from amdgpu_ib_schedule(). This fence is used to wait for job completion. Currently, the code drops the fence reference using dma_fence_put() before calling dma_fence_wait(). If dma_fence_put() releases the last reference, the fence may be freed before dma_fence_wait() is called. This can lead to a use-after-free. Fix this by waiting on the fence first and releasing the reference only after dma_fence_wait() completes. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696) (cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482) 2026-06-05 CVE-2026-31566 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: can: gw: fix OOB heap access in cgw_csum_crc8_rel() cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index */ cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. 2026-06-05 CVE-2026-31570 openEuler-24.03-LTS-SP3 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION Drop the WARN in sev_pin_memory() on npages overflowing an int, as the WARN is comically trivially to trigger from userspace, e.g. by doing: struct kvm_enc_region range = { .addr = 0, .size = -1ul, }; __vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range); Note, the checks in sev_mem_enc_register_region() that presumably exist to verify the incoming address+size are completely worthless, as both "addr" and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater than ULONG_MAX. That wart will be cleaned up in the near future. if (range->addr > ULONG_MAX || range->size > ULONG_MAX) return -EINVAL; Opportunistically add a comment to explain why the code calculates the number of pages the "hard" way, e.g. instead of just shifting @ulen. 2026-06-05 CVE-2026-31590 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup Disable the delayed work before clearing BAR mappings and doorbells to avoid running the handler after resources have been torn down. Unable to handle kernel paging request at virtual address ffff800083f46004 [...] Internal error: Oops: 0000000096000007 [#1] SMP [...] Call trace: epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P) process_one_work+0x154/0x3b0 worker_thread+0x2c8/0x400 kthread+0x148/0x210 ret_from_fork+0x10/0x20 2026-06-05 CVE-2026-31595 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: x86/CPU: Fix FPDSS on Zen1 Zen1's hardware divider can leave, under certain circumstances, partial results from previous operations. Those results can be leaked by another, attacker thread. Fix that with a chicken bit. 2026-06-05 CVE-2026-31628 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example 2026-06-05 CVE-2026-31630 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix NULL-deref on disconnect Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. 2026-06-05 CVE-2026-31651 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0 2026-06-05 CVE-2026-31665 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) 2026-06-05 CVE-2026-31667 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_netem: fix out-of-bounds access in packet corruption In netem_enqueue(), the packet corruption logic uses get_random_u32_below(skb_headlen(skb)) to select an index for modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0. Passing 0 to get_random_u32_below() takes the variable-ceil slow path which returns an unconstrained 32-bit random integer. Using this unconstrained value as an offset into skb->data results in an out-of-bounds memory access. Fix this by verifying skb_headlen(skb) is non-zero before attempting to corrupt the linear data area. Fully non-linear packets will silently bypass the corruption logic. 2026-06-05 CVE-2026-31675 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - limit RX SG extraction by receive buffer budget Make af_alg_get_rsgl() limit each RX scatterlist extraction to the remaining receive buffer budget. af_alg_get_rsgl() currently uses af_alg_readable() only as a gate before extracting data into the RX scatterlist. Limit each extraction to the remaining af_alg_rcvbuf(sk) budget so that receive-side accounting matches the amount of data attached to the request. If skcipher cannot obtain enough RX space for at least one chunk while more data remains to be processed, reject the recvmsg call instead of rounding the request length down to zero. 2026-06-05 CVE-2026-31677 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: openvswitch: defer tunnel netdev_put to RCU release ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already detached the device. Dropping the netdev reference in destroy can race with concurrent readers that still observe vport->dev. Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let vport_netdev_free() drop the reference from the RCU callback, matching the non-tunnel destroy path and avoiding additional synchronization under RTNL. 2026-06-05 CVE-2026-31678 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, a memory out-of-bounds access vulnerability exists in the act_csum module's tcf_csum_act() function when processing nested VLAN headers. When an skb still carries in-payload VLAN tags, the function walks nested VLAN headers directly from skb->data. The current code reads vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without first ensuring that the full VLAN header is present in the linear area. If only part of an inner VLAN header is linearized, accessing h_vlan_encapsulated_proto reads past the linear area, and the following skb_pull(VLAN_HLEN) may violate skb invariants. 2026-06-05 CVE-2026-31684 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. 2026-06-05 CVE-2026-31685 openEuler-24.03-LTS-SP3 Critical 9.4 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch. 2026-06-05 CVE-2026-31689 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed When retrieving the ID for the CPU, don't attempt to copy the ID blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222 sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. 2026-06-05 CVE-2026-31697 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed When retrieving the PDH cert, don't attempt to copy the blobs to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033 CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347 sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. 2026-06-05 CVE-2026-31698 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed When retrieving the PEK CSR, don't attempt to copy the blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405 CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872 sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. 2026-06-05 CVE-2026-31699 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds. 2026-06-05 CVE-2026-31708 openEuler-24.03-LTS-SP3 High 8.1 AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. 2026-06-05 CVE-2026-31738 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. 2026-06-05 CVE-2026-31752 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready. 2026-06-05 CVE-2026-31755 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). 2026-06-05 CVE-2026-31771 openEuler-24.03-LTS-SP3 High 8.1 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. 2026-06-05 CVE-2026-31773 openEuler-24.03-LTS-SP3 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler() The memcpy function assumes the dynamic array notif->matches is at least as large as the number of bytes to copy. Otherwise, results->matches may contain unwanted data. To guarantee safety, extend the validation in one of the checks to ensure sufficient packet length. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2026-06-05 CVE-2026-31779 openEuler-24.03-LTS-SP3 High 8.1 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list. 2026-06-05 CVE-2026-31781 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state. 2026-06-05 CVE-2026-43020 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 2026-06-05 CVE-2026-43036 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields. 2026-06-05 CVE-2026-43040 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end of the previous SGL when performing sg_chain() in af_alg_alloc_tsgl(). 2026-06-05 CVE-2026-43043 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized. 2026-06-05 CVE-2026-43061 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix not releasing workqueue on .release() The workqueue associated with an DSA/IAA device is not released when the object is freed. 2026-06-05 CVE-2026-43064 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Skip discovery table for offline dies This warning can be triggered if NUMA is disabled and the system boots with fewer CPUs than the number of CPUs in die 0. WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore] Currently, the discovery table continues to be parsed even if all CPUs in the associated die are offline. This can lead to an array overflow at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may trigger the warning above or cause other issues. 2026-06-05 CVE-2026-43079 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: fix null-ptr-deref in icmp_build_probe() ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing this error pointer to dev_hold() will cause a kernel crash with null-ptr-deref. Instead, silently discard the request. RFC 8335 does not appear to define a specific response for the case where an IPv6 interface identifier is syntactically valid but the implementation cannot perform the lookup at runtime, and silently dropping the request may safer than misreporting "No Such Interface". 2026-06-05 CVE-2026-43099 openEuler-24.03-LTS-SP3 High 7.5 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() As kcalloc() may fail, check its return value to avoid a NULL pointer dereference when passing it to of_property_read_u32_array(). 2026-06-05 CVE-2026-43148 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time, and avoid triggering assertion. Similar fix to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") - commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") 2026-06-05 CVE-2026-43156 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: md/bitmap: fix GPF in write_page caused by resize race A General Protection Fault occurs in write_page() during array resize: RIP: 0010:write_page+0x22b/0x3c0 [md_mod] This is a use-after-free race between bitmap_daemon_work() and __bitmap_resize(). The daemon iterates over `bitmap->storage.filemap` without locking, while the resize path frees that storage via md_bitmap_file_unmap(). `quiesce()` does not stop the md thread, allowing concurrent access to freed pages. Fix by holding `mddev->bitmap_info.mutex` during the bitmap update. 2026-06-05 CVE-2026-43163 openEuler-24.03-LTS-SP3 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). 2026-06-05 CVE-2026-43186 openEuler-24.03-LTS-SP3 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which is a valid index - so add a check for this. 2026-06-05 CVE-2026-43212 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: x86/kexec: add a sanity check on previous kernel's ima kexec buffer When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>", the physical range that contains the carried over IMA measurement list may fall outside the truncated RAM leading to a kernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) – not-present page Other architectures already validate the range with page_is_ram(), as done in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") do a similar check on x86. Without carrying the measurement list across kexec, the attestation would fail. 2026-06-05 CVE-2026-43240 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742. 2026-06-05 CVE-2026-43262 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph 2026-06-05 CVE-2026-43273 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none) RIP: 0010:percpu_counter_add_batch+0x13/0xa0 Call Trace: <TASK> ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/test With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads and validates the block bitmap. When the validation fails, ext4_mark_group_bitmap_corrupted() attempts to update sbi->s_freeclusters_counter. However, this percpu_counter has not been initialized yet at this point, which leads to the panic described above. Fix this by moving the execution of ext4_percpu_param_init() to occur before ext4_mb_init(), ensuring the per-CPU counters are initialized before they are used. 2026-06-05 CVE-2026-43288 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during vmalloc cleanup triggers expensive stack unwinding that acquires RCU read locks. Processing a large purge_list without rescheduling can cause the task to hold CPU for extended periods (10+ seconds), leading to RCU stalls and potential OOM conditions. The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node() where iterating through hundreds or thousands of vmap_area entries and freeing their associated shadow pages causes: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l ... task:kworker/0:17 state:R running task stack:28840 pid:6229 ... kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299 purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299 Each call to kasan_release_vmalloc() can free many pages, and with page_owner tracking, each free triggers save_stack() which performs stack unwinding under RCU read lock. Without yielding, this creates an unbounded RCU critical section. Add periodic cond_resched() calls within the loop to allow: - RCU grace periods to complete - Other tasks to run - Scheduler to preempt when needed The fix uses need_resched() for immediate response under load, with a batch count of 32 as a guaranteed upper bound to prevent worst-case stalls even under light load. 2026-06-05 CVE-2026-43292 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix event ring index not programmed for IPA v5.0+ For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to CH_C_CNTXT_1. The v5.0 register definition intended to define this field in the CH_C_CNTXT_1 fmask array but used the old identifier of ERINDEX instead of CH_ERINDEX. Without a valid event ring, GSI channels could never signal transfer completions. This caused gsi_channel_trans_quiesce() to block forever in wait_for_completion(). At least for IPA v5.2 this resolves an issue seen where runtime suspend, system suspend, and remoteproc stop all hanged forever. It also meant the IPA data path was completely non functional. 2026-06-05 CVE-2026-43345 openEuler-24.03-LTS-SP3 High 7.5 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks. 2026-06-05 CVE-2026-43366 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header. 2026-06-05 CVE-2026-43406 openEuler-24.03-LTS-SP3 Critical 9.1 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning. 2026-06-05 CVE-2026-43419 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers. 2026-06-05 CVE-2026-43427 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout. 2026-06-05 CVE-2026-43428 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix deadlock between devlink lock and esw->wq esw->work_queue executes esw_functions_changed_event_handler -> esw_vfs_changed_event_handler and acquires the devlink lock. .eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) -> mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked -> mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks when esw_vfs_changed_event_handler executes. Fix that by no longer flushing the work to avoid the deadlock, and using a generation counter to keep track of work relevance. This avoids an old handler manipulating an esw that has undergone one or more mode changes: - the counter is incremented in mlx5_eswitch_event_handler_unregister. - the counter is read and passed to the ephemeral mlx5_host_work struct. - the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on. - mlx5_eswitch_cleanup does the final draining before destroying the wq. No longer flushing the workqueue has the side effect of maybe no longer cancelling pending vport_change_handler work items, but that's ok since those are disabled elsewhere: - mlx5_eswitch_disable_locked disables the vport eq notifier. - mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything. - mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished. 2026-06-05 CVE-2026-43468 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix handling of MAY_BACKLOG requests MAY_BACKLOG requests can return EBUSY. Handle them by checking for that value and filtering out EINPROGRESS notifications. The Linux kernel CVE team has assigned CVE-2026-43493 to this issue. 2026-06-05 CVE-2026-43493 openEuler-24.03-LTS-SP3 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. 2026-06-05 CVE-2026-43503 openEuler-24.03-LTS-SP3 High 8.8 AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). 2026-06-05 CVE-2026-45834 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey < 2026-06-05 CVE-2026-45861 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]--- 2026-06-05 CVE-2026-45911 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains. 2026-06-05 CVE-2026-45943 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review. 2026-06-05 CVE-2026-45947 openEuler-24.03-LTS-SP3 Low 3.3 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: gfs2: fix memory leaks in gfs2_fill_super error path Fix two memory leaks in the gfs2_fill_super() error handling path when transitioning a filesystem to read-write mode fails. First leak: kthread objects (thread_struct, task_struct, etc.) When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the created kernel threads (logd and quotad) are never destroyed. This occurs because the fail_per_node label doesn't call gfs2_destroy_threads(). Second leak: quota bitmap buffer (8192 bytes) When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but before other operations complete, the allocated quota bitmap is never freed. The fix moves thread cleanup to the fail_per_node label to handle all error paths uniformly. gfs2_destroy_threads() is safe to call unconditionally as it checks for NULL pointers. Quota cleanup is added in gfs2_make_fs_rw() to properly handle the withdrawal case where quota initialization succeeds but the filesystem is then withdrawn. Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265 Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 2026-06-05 CVE-2026-45961 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Cover a missed execution path with a new check. 2026-06-05 CVE-2026-45982 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap() Some crafted images can have illegal (!partial_decoding && m_llen < m_plen) extents, and the LZ4 inplace decompression path can be wrongly hit, but it cannot handle (outpages < inpages) properly: "outpages - inpages" wraps to a large value and the subsequent rq->out[] access reads past the decompressed_pages array. However, such crafted cases can correctly result in a corruption report in the normal LZ4 non-inplace path. Let's add an additional check to fix this for backporting. Reproducible image (base64-encoded gzipped blob): H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz 2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w ywAAAAAAAADwu14ATsEYtgBQAAA= $ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt $ dd if=/mnt/data of=/dev/null bs=4096 count=1 2026-06-05 CVE-2026-45999 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. The Linux kernel CVE team has assigned CVE-2026-46044 to this issue. 2026-06-05 CVE-2026-46044 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). The Linux kernel CVE team has assigned CVE-2026-46051 to this issue. 2026-06-05 CVE-2026-46051 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] The Linux kernel CVE team has assigned CVE-2026-46076 to this issue. 2026-06-05 CVE-2026-46076 openEuler-24.03-LTS-SP3 High 7.9 AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com The Linux kernel CVE team has assigned CVE-2026-46078 to this issue. 2026-06-05 CVE-2026-46078 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@] The Linux kernel CVE team has assigned CVE-2026-46082 to this issue. 2026-06-05 CVE-2026-46082 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users. The Linux kernel CVE team has assigned CVE-2026-46093 to this issue. 2026-06-05 CVE-2026-46093 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved:mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lockPatch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could racewith their writes, results in use-after-free. Fix those.This patch (of 2):damon_sysfs_scheme_filter->mmecg_path can be read and written by users,via DAMON sysfs memcg_path file. It can also be indirectly read, for theparameters {on,off}line committing to DAMON. The reads for parameterscommitting are protected by damon_sysfs_lock to avoid the sysfs filesbeing destroyed while any of the parameters are being read. But theuser-driven direct reads and writes are not protected by any lock, whilethe write is deallocating the memcg_path-pointing buffer. As a result,the readers could read the already freed buffer (user-after-free). Notethat the user-reads don't race when the same open file is used by thewriter, due to kernfs's open file locking. Nonetheless, doing the readsand writes with separate open files would be common. Fix it by protectingboth the user-direct reads and writes with damon_sysfs_lock. 2026-06-05 CVE-2026-46121 openEuler-24.03-LTS-SP3 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. 2026-06-05 CVE-2026-46138 openEuler-24.03-LTS-SP3 High 8.1 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. The rtnl_delete_link() must happen under RTNL and cannot be executed in RCU context. Calling synchronize_net() while holding RTNL is not good for performance and system stability, so calling netdev_put() in RCU call is the right solution. However, when the device is deleted, rtnl_unlock() calls netdev_run_todo() and blocks until all references are gone. In the current code, this means that call_rcu() is never reached, the vport is never freed, and the reference is never released, causing a self-deadlock on device removal. The fix moves the rcu_call() before rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from rtnl_unlock()->netdev_run_todo() while RTNL itself is already released. 2026-06-05 CVE-2026-46165 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel's RISC-V KVM subsystem, when the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is not freed, causing a memory leak. An attacker can trigger this via ioctl(vm_fd, KVM_CREATE_VCPU), potentially leading to resource exhaustion. 2026-06-05 CVE-2026-46171 openEuler-24.03-LTS-SP3 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the mlx4_ib_create_srq() function fails to release resources allocated by mlx4_srq_alloc() in error handling paths, leading to a resource leak. An attacker could exploit this vulnerability to cause resource exhaustion or denial of service. 2026-06-05 CVE-2026-46178 openEuler-24.03-LTS-SP3 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582 In the Linux kernel, the spi_nor_params_show() function uses sizeof(snor_f_names) to calculate the array length. Since snor_f_names is an array of pointers, sizeof returns the total byte size of the pointer array (element_count sizeof(void )), which on 64-bit systems is 8 times larger than intended. This causes an out-of-bounds read when a flag bit is set that exceeds the actual element count but falls within the inflated byte-size count. The fix replaces sizeof with ARRAY_SIZE to pass the actual number of elements. 2026-06-05 CVE-2026-46190 openEuler-24.03-LTS-SP3 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-06-05 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-2582